Products

TEGO® Dispers 658 is a non-ionic wetting and dispersing additive that can be used in waterborne formulations and in universal colorants. It provides excellent pigment wetting and color strength development especially for organic pigments.

TEGO® DISPers 670 is a polymeric, high-performance wetting and dispersing additive for solvent borne industrial and automotive applications. Suitable for all kinds of pigments. Shows outstanding viscosity reduction, especially with inorganic pigments. Shows fast pigment wetting. Creates a Newtonian flow behavior.

SURFYNOL® 104 PG 50 is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.

EBECRYL® 445 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1). EBECRYL 445 is not based on bisphenol A raw materials, and is tin-free. EBECRYL 445 exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL 445 display good adhesion to metals, and paper.

EBECRYL® 1859 is a high molecular weight acrylate especially developed for high speed UV, HUV, UV LED, and EB cured offset lithographic inks. EBECRYL® 1859 exhibits excellent lithographic behavior, very good pigment wetting and high reactivity.

Polycin® 53 is a 100% solids, multifunctional castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. It will impart flexibility and improved pigment wetting into many polyurethane systems. Polycin® 53, as a reactive diluent, will allow for VOC reduction while imparting the beneficial properties of castor oil derivatives, such as improved flow and leveling.

SURFYNOL® 104 E is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.

EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate that exhibits outstanding flow and leveling and pigment wetting properties. Films of EBECRYL® 3702 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, improved water resistance and good chemical resistance.

TEGO® DISPers 1010 is a polymeric wetting and dispersing additive used todispersepigments in solventsof low polarity, like whitespirits. Especiallyin low polar solvents, itsoutstanding viscosityreduction can beobserved.

CARBOWET® 138 is a non-ionic wetting additive that provides additional dispersing properties. Wets all kinds of pigments. Was designed as alternative to APEs with a HLB-value around 14.

TEGO® VariPlus 1201 TF strongly improves mechanical properties of solventborne inks and coatings. It enhances gloss, blocking resistance, and adhesion on many substrates.

LIPOTIN® A is a wetting and dispersing additive based on soya lecithin for waterborne formulations. It helps the wetting of the pigments and gives additional stabilization.

SURFYNOL® 104 BC is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in water borne coatings and inks.

EBECRYL® 3703 is an amine modified bisphenol A epoxy diacrylate that exhibits exceptionally fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 3703 cured by UV or electron beam (EB) demonstrate good flexibility, high gloss and excellent chemical resistance. The amine modification can also improve adhesion to plastics.

EBECRYL® 3503 is the modified diacrylate ester of a bisphenol A based epoxy resin diluted ~20% by weight with the reactive diluent propoxylated glycerol triacrylate (OTA-480)(1). It is designed primarily for use in ultraviolet light (UV) or electron beam (EB) curable formulations. EBECRYL® 3503 is light in color with high UV/EB reactivity, and exhibits good wetting of pigments, matting agents and substrates compared to unmodified epoxy acrylates. Cured films based on EBECRYL® 3503 will typically demonstrate high gloss and hardness, and good chemical resistance.