Products

SMY-LT Bentonite is an easy dispensable rheological additive for water borne systems. SMY-LT can disperse in water forming suspension gel. It can provide excellent thickening and anti-

ACRYSOL™ DR-1 Thickener is a synthetic, liquid thickener that offers a low cost/high performance alternative to cellulosic thickeners in interior flat latex paints. ACRYSOL™ DR-1 Thickener provides application and feel properties very similar to medium grades of cellulosic and hydrophobically modified HEC thickeners with excellent resistance to roller spattering and improved leveling in most formulations. ACRYSOL™ DR-1 Thickener is easy to handle and incorporate during the paint manufacturing process and is highly resistant to microbial attack. ACRYSOL™ DR-1 Thickener is part of the Designed Rheology product line which provides customized rheology based on key components.

ACRYSOL™ DR-300 associative thickener delivers effective shear-thinning rheology in coatings ranging from matt to semi-gloss, with a primary focus on exterior applications. The distinctive viscosity profile of this synthetic liquid thickener ensures sag resistance for higher film builds, all while maintaining the improved flow typical of associative thickeners. ACRYSOL™ DR-300 also provides good early water resistance to acrylic, styrene-acrylic, and vinyl-acrylic coatings, even on chalky or aged surfaces. As with all Designed Rheology products, ACRYSOL™ DR-300 is easily incorporated during the paint manufacturing process. A key benefit of ACRYSOL™ DR-300 is that it offers superior performance at a lower formulation cost compared to traditional cellulosic thickeners, owing to its enhanced thickening efficiency.

SIPERNAT® 320 DS is a highly dispersible silica powder with high surface area, commonly used in coatings, adhesives, and sealants. It improves rheology, reduces viscosity, and provides enhanced flow properties. It is widely used in industrial and consumer goods applications for improving the performance and consistency of the final product.

RHOPLEX® E-2961 is a polyacrylate based polymer that contains carboxylic acid groups. This rheology modifier is a pre neutralized alkali-swellable emulsion which requires no pH adjustment. This RM offers a good combination of thickening efficiency and water holding. It is excellent for heavy paper and paperboard applications where heavy coat weights are common.

Bermocoll® EBM 8000 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

ACRYSOL™ G-111 is an ammonia neutralized poly-acrylate solution polymer recommended for thickening and stabilizing water based synthetic and natural latexes. It produces thickened latexes of a smooth and consistent texture and is insensitive to sodium, calcium, and magnesium ions.

ACRYSOL™ RM-3030 Rheology Modifier is a solvent-free1, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal mid-shear rheology response. ACRYSOL™ RM-3030 Rheology Modifier has demonstrated improved syneresis resistance in broad formulation latitude. ACRYSOL™ RM-3030 Rheology Modifier should be added under good mixing conditions to ensure complete incorporation into the formulation.

Bermocoll® EBM 10000 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

AEROSIL® R 974 W is a hydrophobic fumed silica after treated with DDS (Dimethyldichlorosilane) based on a hydrophilic fumed silica with a specific surface area of 200m²/g. The product thickening efficiency of AEROSIL® R 974 W ex RHE is consistent with the Waterford-produced AEROSIL® R 974. This profile is different than the thickening profile of standard RHE quality.

AEROSIL® 200 V is a densified hydrophilic fumed silica with a specific surface area of 200 m²/g.

ACRYSOL™ RM-725 Rheology Modifier is a solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) based on proprietary technology for an excellent balance of properties. ACRYSOL™ RM-725 Rheology Modifier is designed as a universal, efficient mid shear viscosity builder with all binder types that are used for interior wall paints as well as exterior systems for wood, trim stains and masonry. This KU-building associative thickener offers formulators an excellent balance of sag resistance and leveling, including PVA and VAE binder based paints. ACRYSOL™ RM-725 Rheology Modifier also contributes significant to high shear viscosity, allowing the reduction of ICI builder use level in the paint.

AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxidein the ratio of 5:1.

SIPERNAT® 320 DS Coating is a very finely ground silica with good thickening and excellent flow improving properties. SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates.

Bermocoll® EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.