Products

TEGO® VariPlus 1201 TF strongly improves mechanical properties of solventborne inks and coatings. It enhances gloss, blocking resistance, and adhesion on many substrates.

VANCRYL® 950 emulsion is a very low Tg acrylic polymer designed for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. VANCRYL® 950 also has the unusual combined properties of excellent resolubility and fast drying. These properties are needed when converting flexible packaging printing from solvent-based to water-based formulations. VANCRYL® 950 emulsion is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used pigment dispersions. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, alcohols, and waxes. VANCRYL® 950 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.48.

REAFREE® 4762 is a binder and resin used in powder coating applications. It provides excellent flow, good mechanical properties, high gloss, and outdoor durability.

RHOPLEX® SG-10AF is a versatile 100% copolymer that was designed for use in high-quality interior/exterior semigloss paints. RHOPLEX® SG-10AF provides paint formulators with an opportunity to achieve excellent early and ultimate block resistance, and very good flow and leveling. RHOPLEX® SG-10AF establishes a new level of performance for aqueous semigloss applications.

TEGO® DISPers 747 W is an anionic wetting and dispersing additive for water borne architectural formulations. Wets and stabilizes iron oxides with very effective viscosity reduction.Enables high pigment loadings with inorganic pigments and is able to stabilize organic pigments. As a dispersant in base paints, it shows excellent color acceptance.

Licocare® RBW 102 flakes VITA is a polar modified wax based on renewable resources.

TEGO® DISPers 752 W is an anionic wetting and dispersing additive for transparent iron oxides and transparent titanium dioxide in waterborne formulations. Provides outstanding transparency, high pigment loadings, and long-term stability, especially when used in binder-free dispersions.

EBECRYL® 605/40 is a bisphenol A epoxy diacrylate diluted approximately 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

EBECRYL® 3701-20T is the modified bisphenol A epoxy diacrylate, EBECRYL 3701, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. Films of EBECRYL® 3701-20T cured by ultraviolet light (UV) or electron beam (EB) exhibit flexibility, abrasion resistance, high gloss, and superior chemical resistance.

D.E.R.® 6225 is a modified, low molecular weight, solid reaction product of epichlorohydrin and bisphenol A. D.E.R. 6225 Resin is a modified, low molecular weight, solid epoxy resin which has been developed mainly for use in powder coatings. It has been designed for applications where excellent flow out and high gloss are required such as automotive, appliance or general metal decorative coatings. D.E.R.® 6225 is also suitable for use in thin film applications.

REAFREE® 4781 is a TGIC cure resin, 93/7 type, for outdoor durable thermosetting powder coatings. TMA free.

RHOPLEX® WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal stability (robustness) of RHOPLEX® WL-100 accommodates a broad range of formulation types and formulation process techniques, providing the formulator with a versatile binder for a variety of applications. Robustness, along with 50% weight solids, allows the formulator to achieve volume solids above conventional waterborne binders.

REAFREE® 4703 is a binder and resin used in paints and coatings.

HIRENOL® PL-500 has low viscosity, low volatile extender for epoxy, polyurethane and acrylic. Act as a plasticizer, pot-life controller, diluent, modifier. Good color and excellent UV-resistance. Wide process window, non-toxic, good compatibility, storage stability. Excellent performance in adhesion, hardness, water resistance, gloss, toughness, exduation, shrinkage, self-leveling, trowelability.

RHOPLEX® HG-95P Emulsion Polymer was developed specifically for low VOC aqueous gloss enamels with excellent durability and resistance properties. It is recommended for interior/exterior applications in both high gloss and semigloss finishes. RHOPLEX® HG-95P Emulsion Polymer uses new ambient temperature crosslinking technology to offer improved performance versus conventional latex polymers. This new polymer technology was designed to provide VOC compliant enamels with excellent hardness development and durability for high traffic interior applications.