Products

Bleumina® 391 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

TEGO® VariPlus CA shows excellent viscosity reduction and helps accelerate the drying speed. It provides very good adhesion on metal combined with high gloss and good weather resistance.

EBECRYL® 3415 is a modified bisphenol A epoxy acrylate diluted with 40% 1, 6-hexanediol diacrylate (HDDA). This acrylated epoxy was developed for ultraviolet light (UV) curable screen printing, and exhibits excellent reactivity and good adhesion to various non-porous substrates. EBECRYL® 3415 meets all regulatory requirements and is no longer subject to the Significant New Use Rule (SNUR).

EBECRYL® 3720-TM40 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 40% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 3720-TM40 exhibits fast cure response and light color. Films of EBECRYL® 3720-TM40 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss and surface hardness, and excellent chemical resistance.

CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling.

D.E.R.® 662UH Solid Epoxy Resin is a low molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 662UH Epoxy Resin is designed for decorative powder coating applications requiring good flow and gloss. The melt viscosity and good reactivity of D.E.R.® 662UH Resin make this resin particularly suitable for the formulation of hybrid powder coatings. The resin can also be used alone with conventional curing agents for pure epoxy powder coatings.

Bleumina® 223 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

ACRYSOL™ RM-6000 Rheology Modifier is a non-ionic urethane rheology modifier based on solvent-free1 technology offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and leveling with high film build while maintaining good sag resistance. ACRYSOL™ RM- 6000 Rheology Modifier has demonstrated utility in a broad range of emulsions, including the “newer generation”, low-VOC types such as RHOPLEX™ SG-30 Acrylic Emulsion and RHOPLEX™ ML-300 Acrylic Emulsion.

AP 5945 is a low viscosity, non-blushing, cycloaliphatic amine modified hardener for epoxy resin based lacquers and coatings.

EBECRYL® 83 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL 83 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. EBECRYL 83 is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks.

UVACURE® 1600 is thermally stable iodonium salt photoinitiators are used to induce the polymerization of epoxides and other cationically polymerizable materials on exposure to UV light. UVACURE® 1600 is p-(octyloxyphenyl)phenyliodonium hexafluoroantimonate in solid form. It is compatible with most UV cationic cure systems and is especially useful for the rapid polymerization of thin clear coatings on metal, plastic, and paper substrates. Coatings cured using UVACURE® 1600 generally exhibit excellent adhesion, particularly on metal substrates.

EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing.EBECRYL LEO 10551 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that was created to lower the VOC content of a coating more than other K-FLEX® 500P plasticizers. It was specifically designed for the coatings industry where very low VOC content is required or other application areas where low VOC content is critical.

VANCRYL® 927 is a medium glass transition temperature acrylic emulsion for the graphic arts industry. Excellent gloss can be obtained by utilizing VANCRYL® 927 in inks and coatings. Its film formation properties, coupled with its rapid water release, result in very fast drying. It is suitable for both flexographic and gravure printing on paper substrates. VANCRYL® 927 has excellent compatibility with pigment dispersions and alcohols. Inks formulated with VANCRYL® 927 have good transfer, printability, and resolubility for high-quality printing on various paper substrates (including metalized paper) and aluminum foil. VANCRYL® 927 can also be formulated as a high gloss OPV that will very quickly develop water, oil, and scuff resistance.

Bleumina® 312 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.