Products

EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 118 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improving substrate adhesion.

EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing.

WANNATE® H1210 is a kind of monomeric cycloaliphatic diisocyanate which is colorless or light yellow liquid with low viscosity.

Caspol™ 5003 is a 100% solids castor oil based reactive diluent with a linear chain backbone having a low viscosity, good compatibility and wetting. Caspol™ 5003, a linear chain diol, is composed of a blend of primary and secondary hydroxyls which makes this polyol more reactive yielding slightly harder and less flexible components than either Caspol™ 5001 or DBTM Oil.

CYMEL® U-80 Resin is a highly n-butylated urea resin supplied at >96% solids content. Its high extent of alkylation and hydrophobic nature make the CYMEL® U-80 Resin suitable for a wide range of coating applications, including high solids primers for automotive, general industrial, and container coatings, providing improved film flexibility and adhesion to various substrates. CYMEL® U-80 resin is insoluble in water but can be used in emulsified form as a crosslinking agent in water-dispersible alkyds, acrylic resins, and in emulsion systems.

EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. EBECRYL 893 provides resistance to yellowing upon cure and over its lifetime. The low viscosity of EBECRYL 893 also provides latitude to achieve low viscosity formulations, which are required for field applied applications. Concrete and VCT coatings based on EBECRYL 893 provide a good balance of properties such as cure speed, adhesion, hardness, and scratch resistance. Good chemical and solvent resistance and high gloss are also obtained with concrete and VCT coatings based on EBECRYL 893.

Bara C is a barium sulfate product used primarily as a filler and pigment in various industrial applications. It is commonly used in coatings, plastics, and elastomers, offering benefits such as opacity, durability, and enhanced processing characteristics. Known by other names such as Barium sulfate, Barium white, and BaSO₄, it is an effective additive for improving the quality and performance of the final product. Bara C is also referred to by synonyms like Liquibarine and Micropaque.

CYMEL® 323 is a crosslinking agent that offers fast cure, humidity resistance, improved film hardness, and solvent resistance in CASE ingredients.

EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). Lithographic inks based on EBECRYL® 450 display outstanding printing qualities, including excellent ink transfer, good dot definition, and proper tack and rheological properties.

ZETASPERSE® 3100 is an anionic wetting and dispersing additive for waterborne formulations.Showsoutstanding stabilization properties.

RHOPLEX® VSR-5102 is a 100% Acrylic Binder designed for low-VOC interior and exterior flat to semi-gloss coatings. RHOPLEX® VSR-5102 can be formulated with little or no coalescent to pass the most stringent VOC regulations and is manufactured without the use of APEO surfactants. RHOPLEX® VSR-5102 offers a good balance of abrasive scrub resistance and stain removal along with very good exterior durability and dirt pick up resistance facilitating the formulation of high quality, low-VOC and low odor interior and exterior paints.

KAYDOL® White Mineral Oil is a refined white mineral oil used in food ingredients and fluids & lubricants applications.

EBECRYL® 4740 is a weather-stable aliphatic urethane acrylate having a low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4740 exhibit high reactivity and yield tough and elastic polymers. Coatings formulated with EBECRYL® 4740 are characterized by very good chemical and mechanical resistances, scratch resistance, abrasion resistance, and high resistance to yellowing.

EBECRYL® 4857 is a low viscosity, monomer free aliphatic urethane diacrylate which exhibits good flexibility in UV or EB cured films. The resin is designed to exhibit low yellowing and good exterior durability. Due to its low Tg the product is suitable for applications requiring haptic properties (e.g. “soft touch/feel”).

Non-Leafing Type Aluminium Paste TZ-585A is a chemical mixture used in paints and coatings. It features non leafing properties for case ingredient applications.