Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM12483
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Performance Highlights
EBECRYL® 4857 is characterized by:
- Low viscosity for handling ease
- Light color
- Low yellowing
UV/EB cured products based on EBECRYL 4857 are characterized by the following performance properties:
- Good flexibility
- Rubbery feeling
- Good weathering resistance
The haptic properties of UV/EB cured formulations containing EBECRYL® 4857 will depend on the selection of the other formulation components, such as coresins, suitable additives, reactive diluents and photoinitiators.
Applications & Uses
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Markets
- Applications
- Product Applications
Formulated UV/EB curable products containing EBECRYL 4857 may be applied by spray coating, screen, roller and curtain coating methods. EBECRYL 4857 is recommended for use in:
- Haptic coating on wood and plastics
- Flexible coatings
- Exterior durable coatings
Properties
- Physical Form
- Product Properties
- Good flexibility
- Rubbery feeling
- Good weathering resistance
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
- Wash thoroughly after handling.
- Keep container tightly closed.
- Use with adequate ventilation.
Other
- Appearance (SDS)
- Clear liquid
- Color (SDS)
- Clear
- Insoluble in (SDS)
- Water
- Odor (SDS)
- Ester
- Other Hazards
- Polymerization may occur from excessive heat ,contamination or exposure to direct sunlight , Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates.
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Material Composition
Value Units Test Method / Conditions Oligomer Content 100.0 - - Mechanical Properties
Value Units Test Method / Conditions Elongation 23.0 - at Break Tensile Modulus 1813.0 psi psi Tensile Strength 334.0 psi psi - Physical Properties
Value Units Test Method / Conditions Density 1.16 g/mL g/mL At 25°C Glass Transition Temperature (Tg) 4.0 °C °C Storage Temperature 39.2-104.0 °F °F Viscosity 2000.0 - At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 250.0 °C °C Density (SDS) 1.14 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Vapor Pressure (SDS) 0.7 - at 20°C Viscosity (SDS) 1500.0-2500.0 - DIN EN ISO 3219 at 25°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 -