Products

EBECRYL® 230 is an aliphatic urethane diacrylate characterized by its light color and low viscosity. Films of EBECRYL 230 cured via exposure to ultraviolet light (UV) or electron beam (EB) are soft and flexible, and are resistant to yellowing. EBECRYL 230 is often used as a modifier to improve the flexibility of finished formulations.

EBECRYL® 3720-HD20 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA) to provide a lower viscosity, easier handling product. EBECRYL 3720-HD20 exhibits light color and fast cure response. Films of EBECRYL 3720-HD20 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

CYMEL® 304 Resin is a specially alkylated, high solids melamine crosslinking agent designed specifically for industrial wood coating applications. Systems formulated with CYMEL® 304 resin exhibit excellent catalyzed stability and films develop excellent early hardness, resistance properties, appearance, and cold check resistance. It has very low free formaldehyde and low evolved formaldehyde on cure relative to conventional urea-based formulas.

MARLOWET® 4588 functions as an emulsifier and hammer-finish agent used in solventborne and waterborne coatings.

AP 1063 is very a low viscosity, 100 % solids reactive Phenalkamine adduct hardener with improved blush resistance. It is suitable for low temperature curing of epoxy coating.

EBECRYL® 8314 is an aliphatic urethane tetraacrylate diluted with the reactive diluents isobornyl acrylate (IBOA) and hydroxy propyl methacrylate (HPMA). Films of EBECRYL® 8314 cured by ultraviolet light (UV) or electron beam (EB) have a unique combination of hardness, toughness, flexibility, and abrasion resistance coupled with excellent exterior durability properties. These performance properties make EBECRYL® 8314 ideal for applications such as paint protection, printed electronics, automotive interior film and embossing or thermoforming after cure.

Polycin® 1679-M3 is a 100% solids, castor oil-based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® 1679-M3 imparts medium hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and levelling.

HP1717 - Polystar Soya Long Oil Alkyd is a long oil alkyd made with soya oil in low odour mineral spirits. It has been formulated for use in wood and metal coatings and architectural enamels. This product exhibits low yellowing, good gloss, and good overall appearance.

ISOFOL 2426 S are primary saturated alcohols with defined branching of the carbon chain. Such alcohols are chemically described as 2-alkyl-1-alkanols and are also referred to as Guerbet alcohols. ISOFOL alcohols are high purity alcohols which offer excellent oxidative and color stability. Additionally, the twin 100% linear alkyl branches of the ISOFOL alcohols give a lower viscosity and better biodegradability than dimer alcohols derived from oxo-alcohols. The unique chemical structure of the ISOFOL alcohols also provides good solubility and solvency.

ALCOTEX 975 is a chemical blend, including methanol and 2-butanol. It is a single-ingredient product primarily used as a crosslinking agent in various CASE (Coatings, Adhesives, Sealants, and Elastomers) applications.

EBECRYL® 3605 is a partially acrylated ester of a bisphenol A type epoxy resin. It contains both acrylate and epoxy functionalities. This resin may be cured by exposure to either ultraviolet light (UV) or electron beam (EB) in conjunction with conventional epoxy curing. It may also be cured with UV radiation using a mixed photoinitiator system consisting of free radical and cationic photoinitiators. Ebecryl®3605 has been developed for applications requiring improved coating performance properties over those obtainable with conventional UV/EB curing alone.

HFGEL 120-B11 is an organophilic clay. It is designed for use primarily in aliphatic, aromatic and other non-polar to medium polarity solvent systems. It disperses easily, does not require chemical activation and can be incorporated at any point in the manufacturing process using typical processing equipment. HFGEL 120-B11 imparts viscosity increase, sag control and helps prevent settling.

RHOPLEX® R-225 is designed to be used in release coatings for masking tapes. It offers tape manufacturers the application advantages of water-based systems. This polymer is simple to formulate, requires no catalyst, and offers the good initial release and re-adhesion characteristics that are obtained with solvent-based release systems.

EBECRYL® 767 is used in radiation-curable coatings and functions as a binder and resin in CASE ingredients.

EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). Lithographic inks based on EBECRYL® 450 display outstanding printing qualities, including excellent ink transfer, good dot definition, and proper tack and rheological properties.