Products

ACRYSOL™ ASE-95NP is a single-ingredient acrylates copolymer thickener with water as a carrier. It is also known as ethyl acrylate-methacrylic acid copolymer.

KRYSTOL™ 550 is a white mineral oil lubricant used as an internal lubricant in plastics and elastomers. It is also used in adhesives, sealants, fluids, and lubricants markets.

ZETASPERSE® 3700 is an anionic wetting and dispersing additive for waterborne formulations.Shows very good wetting properties and stabilizes organic pigmentsespecially well.

APODIL 1005 is a mono glycidyl ester of branched carboxylic acid. The product is used as reactive diluent for high viscosity epoxy resins.

VERSAL YELLOW HGR is a pigment compatible with plasticized polyvinyl chloride (PVC-P), polyolefins, and polypropylenes (PP) used in plastics and elastomers.

RHOPLEX® AC-1034 is a styrenated acrylic copolymer with a distinct composition that imparts excellent water resistance as well as a good degree of flexibility. It is designed for use in edge sealer products and offers very good compatibility with high levels of waxes and fillers, which are often used in such products. RHOPLEX® AC-1034 can also be used as a clear primer or sealer coat to provide water resistance.

ACRYSOL™ RM-845 Rheology Modifier is a new generation, solvent-free, APEO-free, non-ionic product. ACRYSOL™ RM-845 is based upon patented and proprietary technology that enables it to contain 27% solids yet be provided at a low viscosity to allow facile pumping and pouring. ACRYSOL RM-845 Rheology Modifier builds mid-shear Stormer viscosity more efficiently than existing KU-builders. It is recommended for acrylic- and styrene/acrylic-based latex coating formulations. ACRYSOL™ RM-845 Rheology Modifier offers excellent flow and leveling, as well as gloss development, for both interior and exterior paints. It imparts a rheological profile to architectural and industrial coatings very similar to that of ACRYSOL RM-825, but with the benefit of no added solvent, allowing for ultra-low VOC formulations.

EBECRYL® 8209 is a di(trimethylolpropane) tetraacrylate belonging to acrylics, acrylates, polyurethanes (PU), and urethane acrylates chemical families. It functions as a binder and resin in CASE ingredients.

AP 8030 is a unique pale colored non reactive diluent based on cashew nut shell liquid technology. It is an ether alcohol with unsaturated long chain in meta position. Due to its non reactivity with both epoxy resins as well as amine hardeners at ambient temperature, it can be used in both the components in epoxy-amine systems to reduce viscosity, make low VOC and application friendly compositions.

MAINCOTE™ HG-31 is a binder and resin classified under chemical mixtures and blends.

CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post addition to solvent-based low polarity coating systems, it provides a very simple and direct mean of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. It is a softer version than CRAYVALLAC® PA3 WDA 20 with enhanced ease of incorporation. It is also a very cost efficient alternative to organoclays. The shear-thinning characteristic provides a very high viscosity under the low shear rates and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling.

EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. EBECRYL® LEO 10502 is recommended for use in low odor and low migrating UV/EB curable overprint varnishes (OPV’s) and inks.

WANNATE® HT-100 is a solvent free aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

TEGO® Phobe 1409 is an amino-siloxane emulsion for the hydrophobization of coating formulations. It reduces the water uptake and generates a water-beading effect, even in paints with high pH value.