Products

UCECOAT® 7788 is a tin-free, VOC-free, aliphatic polyurethane acrylate dispersion in water. It is a robust and versatile resin ideally suited for UV/EB energy curable industrial coatings applied by spray, curtain or roll coating. UCECOAT® 7788 can be used as the sole formulation resin or in combination with other water-borne resins.

ACRYSOL™ DR-73 Rheology Modifier is a synthetic liquid thickener that provides a cost-effective, high-performance alternative to cellulosic thickeners in interior flat latex paints. ACRYSOL™ DR-73 offers application and feel properties similar to medium-grade cellulosic thickeners and hydrophobically modified HEC thickeners, while increasing high shear viscosity for enhanced film build, brush drag, and hiding power. It also delivers outstanding spatter resistance. ACRYSOL™ DR-73 is easy to handle and incorporate into paint formulations, and it is designed to resist microbial contamination.

RHOPLEX® EP-6060 is recommended for factory-applied interior wood coatings requiring early hardness, block resistance, and sandability. It can be used in clear formulations as a sealer and topcoat or in lightly pigmented (PVC 20%) coatings. The wet and dry clarity of films based on RHOPLEX® EP-6060 is good, especially over light wood.

EBECRYL® 3603 is an epoxy novolac acrylate diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) . EBECRYL 3603 exhibits rapid cure upon exposure to ultraviolet light (UV) or electron beam (EB) and superior chemical and thermal resistance.

EBECRYL® 3730-TP25 is the modified diacrylate ester of a bisphenol A based epoxy resin diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1). It is designed primarily for use in ultraviolet light (UV) or electron beam (EB) curable formulations. EBECRYL® 3730-TP25 is light in color with high UV/EB reactivity, and exhibits good wetting of pigments, matting agents and substrates compared to unmodified epoxy acrylates. Cured films based on EBECRYL® 3730-TP25 will typically demonstrate high gloss and hardness, and good chemical resistance.

ACRYSOL™ SCT-275 Rheology Modifier is an efficient nonionic polyethylene oxide(HEUR) associative rheology modifier which can impart excellent rheological properties including flow and leveling, uniform film formation and film build, to latex based coatings. ACRYSOL™ SCT-275 Rheology Modifier is recommended for use in flat to semigloss paints and primers for both exterior paints and premium interior paints.It is especially suited to replace or be blended with conventional cellulosic thickeners where improved flow and leveling, increased hiding, and spatter resistance is desired. ACRYSOL™ SCT-275 Rheology Modifier is particularly suited for low solids, vinyl acrylic formulations where it yields excellent flow/sag balance, color acceptance, and syneresis resistance. ACRYSOL™ SCT-275 Rheology Modifier is supplied as a low viscosity liquid that is easy to handle and incorporate in the paint making process.

ACRYSOL™ RM-725 Rheology Modifier is a solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) based on proprietary technology for an excellent balance of properties. ACRYSOL™ RM-725 Rheology Modifier is designed as a universal, efficient mid shear viscosity builder with all binder types that are used for interior wall paints as well as exterior systems for wood, trim stains and masonry. This KU-building associative thickener offers formulators an excellent balance of sag resistance and leveling, including PVA and VAE binder based paints. ACRYSOL™ RM-725 Rheology Modifier also contributes significant to high shear viscosity, allowing the reduction of ICI builder use level in the paint.

EBECRYL® 411 is a modified polyester resin for flexographic narrow web and rotary screen applications. It was developed for low viscosity inks and coatings with excellent adhesion to unprimed OPP films. EBECRYL® 411 is diluted with dipropyleneglycol diacrylate (DPGDA) monomer.

RHOPLEX® HG-1630 is a binder and resin used in architectural coatings, automotive OEM coatings, automotive and transportation, industrial applications, and paints and coatings. It functions as a binder.

EBECRYL® 8296 is an aliphatic urethane acrylate designed for use in applications requiring haptic properties (e.g. “soft touch”). Films of EBECRYL® 8296 cured via exposure to ultraviolet light (UV) or electron beam (EB) are soft, flexible, and resistant to yellowing coupled with high surface tack.

EBECRYL® 605/40 is a bisphenol A epoxy diacrylate diluted approximately 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

EBECRYL® 3701-20T is the modified bisphenol A epoxy diacrylate, EBECRYL 3701, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. Films of EBECRYL® 3701-20T cured by ultraviolet light (UV) or electron beam (EB) exhibit flexibility, abrasion resistance, high gloss, and superior chemical resistance.

RHOPLEX® AC-261LF is an all-acrylic emulsion polymer for latex floor paints. Its adhesion and abrasion resistance have been designed for this application. It is also suitable for quality exterior semi-gloss trim paints.

EBECRYL® 809 is a modified polyester acrylate designed to exhibit greater flexibility and impact resistance than typical polyester acrylates. Films of EBECRYL® 809 cured by ultraviolet light (UV) or electron beam (EB) provide good flexibility, high gloss, toughness and surface hardness.

RHOPLEX® HG-700 is an aqueous, 100% acrylic polymer designed for interior and exterior, VOC compliant, gloss and semigloss enamels. This binder uses ambient temperature self-crosslinking technology to offer improved enamel performance versus conventional latex polymers. The combination of an all-acrylic backbone and ambient cure crosslinking technology offers excellent performance in gloss and semi-gloss formulations at VOC levels under 150 g/L. Gloss enamels based on RHOPLEX® HG-700 offer durable coatings with excellent adhesion, block resistance, and stain removal. Suitable applications include factory applied topcoats for wood and wood composite materials such as joinery and siding products.