Products

VANCRYL® 965 emulsion is a very low glass transition temperature acrylic polymer designed for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. VANCRYL® 965 also has the unusual combined properties of excellent resolubility and fast drying. These properties are needed when converting flexible packaging printing from solvent-based to water-based formulations. VANCRYL® 965 emulsion is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used pigment dispersions. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, alcohols, and waxes. VANCRYL® 965 can be used as the backbone of printing inks and overprint coatings where various COF or slide resistance requirements are needed, from a range of 0.25 to 0.45.

SILIKOPHEN® P80/MPA is a binder and resin used as a resin in industrial additives.

Experimental DLVNE-61 is a medium low viscosity Novolac resin modified with a Cycloaliphatic polyglycidyl ether (free of any organic solvent) that facilitate high solids coating formulations with low volatile organic compound (VOC) emissions, improved application, strong chemical and thermal resistance.

UVACURE® 1600 is thermally stable iodonium salt photoinitiators are used to induce the polymerization of epoxides and other cationically polymerizable materials on exposure to UV light. UVACURE® 1600 is p-(octyloxyphenyl)phenyliodonium hexafluoroantimonate in solid form. It is compatible with most UV cationic cure systems and is especially useful for the rapid polymerization of thin clear coatings on metal, plastic, and paper substrates. Coatings cured using UVACURE® 1600 generally exhibit excellent adhesion, particularly on metal substrates.

EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. EBECRYL® LEO 10601 exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink water balance and low misting. EBECRYL® LEO 10601 can also be used to produce UV flexo inks with good flow, high gloss and high reactivity.

3M™ Boron Nitride Cooling Filler Platelets 012 is a versatile ceramic material offering thermal conductivity, temperature stability, chemical resistance, high reflectivity, light weighting and electrical insulation. The structure of layered hexagonal plates provides outstanding lubricating properties and is non-abrasive to tooling.

AP 5980 LV is a curing agent designed for use in CASE (Coatings, Adhesives, Sealants, and Elastomers) applications. It facilitates the curing process by promoting crosslinking, enhancing the performance characteristics, and increasing the durability of the cured system.

ELVACE® 757 is a surfactant stabilized vinyl acetate-ethylene copolymer emulsion.

EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. EBECRYL 657 provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, and low misting. It can be blended with epoxy acrylates or EBECRYL 436 or EBECRYL 438 to increase cure speed.

REAFREE® 4703 is a binder and resin used in paints and coatings.

MITM14797 S-21 is a kind of alicyclic epoxy resin, equivalent to ERL4221 resin, giving outstanding performance in UV inks, UV coatings and other fields.

Licocene® PP MA 7452 granules are used in hot melt adhesives. They feature good wetting, improved cohesion, and enhanced adhesion, along with good mechanical properties and reduced moisture uptake. It functions as an adhesion promoter, coupling agent, and wetting agent in both CASE ingredients and plastics & elastomers.

OREVAC® 18341 is a maleic anhydride grafted linear low density polyethylene.

D.E.H.® 58 Epoxy Curing Agent is a low viscosity accelerated aliphatic polyamine curing agent.

D.E.H.® 80 is a phenolic hardener based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A containing a polyacrylate flow modifier and about 0.7% of a curing accelerator.