Products

D.E.H.® 545 hardener is a low viscosity formulated polyamidoamine adduct specially designed for wet application areas. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for optimum adhesion on dry and wet concrete substrates. D.E.R.® 353 and D.E.R.® 324 are recommended epoxy resins for use with D.E.H.® 545 as a starting formulation of primer systems.

AP 5620 is a low viscosity, modified cycloaliphatic polyamine-adduct hardener for epoxy resin based coatings. AP 5620 has a very low viscosity which imparts low mixed viscosity in epoxy system. AP 5620 offer faster hardness development in high build coatings.

EBECRYL® 1200 is an acrylate functional acrylic resin supplied in 45% by weight of butyl acetate. Upon evaporation of the solvent, films of EBECRYL® 1200 are physically dry and tack-free and after UV/EB curing are hard and chemical resistant without embrittlement. The viscosity and cured properties can be adjusted with the addition of reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA). A suitable photoinitiator must be added for polymerization with UV energy

CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. CRAYVALLAC® 60P can generally be used in most solvent-based formulations. Typical applications are epoxy primers, vinyl primers, anti-fouling paints, road marking paints and chlorinated rubber coatings.

HFGEL 120-C is an organophilic clay designed for use in medium to high polarity systems. HFGEL 120-C imparts excellent rheology, particle suspension, and pigment anti-settling.

Bayferrox® TP 5279 is a single-ingredient inorganic pigment, known as Iron Oxide Red. It belongs to the iron oxides chemical family. It is categorized as Pigment Red 101.

TAMOL® 2011 is a high-performance, hydrophobic copolymer dispersant especially useful for semi-gloss and gloss paints. TAMOL® 2011 is well suited for today’s generation of formulations as it is made without solvents or APEO surfactants. TAMOL® 2011 is particularly well fitted for formulations that contain hydrophobically modified urethane rheology modifiers.

EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. EBECRYL® LEO 10553 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

EBECRYL® 8110 is a novel(1) energy curable specialty resin developed to enhance coatings with long lasting easy-to-clean (E2C) surface property. Coatings based on EBECRYL 8110 cured by ultraviolet light (UV) or electron beam (EB) exhibit oil and water repellent effect (high contact angle) and easy removal of fingerprints, oils, dust and other contaminants from coatings surfaces.

TAMOL® 1254 is a versatile, low-cost, low-foaming polyacid dispersant that offers outstanding performance in a wide range of latex paint formulations. It is recommended for low sheen flats through gloss acrylic, styrene-acrylic and vinyl acrylic formulations. In addition to good efficiency, this polyacid dispersant offers excellent stability and color acceptance even in formulations containing zinc oxide.

PARALOID™ B-82 51% Resin is a softer, general purpose acrylic resin. Films based on PARALOID™ B-82 51% Resin Thermoplastic Solution Resin (51%) exhibit the water-white color, durability, flexibility and chemical resistance characteristic of acrylic polymers. PARALOID™ B-82 51% Resin Thermoplastic Solution Resin (51%) is well suited for general product finishing where a softer resin is required. It can be used over metal, plastics, wood and masonry.

3M™ Glass Bubbles K1 are specially formulated for a high strength-to-weight ratio. This allows greater survivability under many demanding processing conditions, such as injection molding. They also produce stable voids, which results in low thermal conductivity and a low dielectric constant. 3M glass bubbles are available in a variety of sizes and grades to help you meet your product and processing requirements.

Bayferrox® TP 5272 is a single-ingredient inorganic pigment, known as Iron Oxide Red. It belongs to the iron oxides chemical family. It is categorized as Pigment Red 101.

CRAYVALLAC® ULTRA is a pure polyamide especially recommended in 2K epoxy primers for its robustness. CRAYVALLAC® ULTRA is a micronised amide wax rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. CRAYVALLAC® ULTRA has been designed to overcome those difficulties which exist with older type organo-wax rheology modifiers e.g. seeding, false-body and migration of readily dissolved species to the surface. Consequently, when used in strong solvent systems, coatings formulated using CRAYVALLAC® ULTRA offer an enhanced performance and very good recoatability.