Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Oligomer, Monomer
- Product Code
- MITM00471
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL® LEO 10553 is characterized by:
- Low viscosity
- Low odor
UV/EB cured products based on EBECRYL® LEO 10553 are characterized by the following performance properties:
- Good cure response
- Good flexibility
- Good solvent resistance
- High gloss
- Low extractables
- Low odor
- Low migration
The properties of UV/EB cured products also depend on the choice of the other formulation components, such as reactive diluent(s), additives and photoinitiators.
Applications & Uses
- Coating End Applications
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
EBECRYL® LEO 10553 is recommended as the main oligomer for low extractable and low odor overprint varnishes and flexographic inks.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
- Quality Standards
Technical Details & Test Data
- Mutagenicity Assessment
EBECRYL® LEO 10553 and its major component have been evaluated for mutagenicity. All studies were conducted in compliance with Good Laboratory Practice standards and according to the specific OECD Guidelines for Testing of Chemicals. EBECRYL® LEO 10553 was not mutagenic in the Ames test (OECD 471). In addition, the major component of this product was not mutagenic in the following studies:
- AMES test – OECD 471
- Micronucleus test in the mouse – OECD 474
In conclusion, on the basis of the weight of the evidence of mutagenicity test results, EBECRYL® LEO 10553 is considered nongenotoxic.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Clear viscous liquid
- Color (SDS)
- Pale yellow to red
- Insoluble in (SDS)
- Water
- Item Number
- Odor
- Low odor
- Odor (SDS)
- Acrylate
- Other Hazards
- Polymerization may occur from excessive heat , contamination or exposure to direct sunlight, Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 Gardner Gardner Gardner Color Scale - Chemical Properties
Value Units Test Method / Conditions Free Amine Content 2004.0 %(W/W) %(W/W) Free Amine Content 200.0 ppm ppm as residue - Physical Properties
Value Units Test Method / Conditions Density 1.12 g/mL g/mL At 25°C Molecular Weight 780.0 g/mol g/mol Viscosity 130.0-200.0 cPs cPs At 25°C - Material Composition
Value Units Test Method / Conditions Residual Solvent Content 10.0 ppm ppm - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.12 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C SetaFlash Closed Cup Vapor Pressure (SDS) max. 1.33 hPa hPa at 20°C Volatile Content (SDS) max. 0.3 % %