Products

VANCRYL® 65 is a medium molecular weight solid acrylic resin that is soluble in alkaline water solutions. Ammonia or other bases may be used as neutralizing agents. Co-solvents such as isopropanol are not required in making the solution, thus facilitating the preparation of low VOC inks and coatings. VANCRYL® 65 provides outstanding properties for high-solids gravure inks and waterborne clear overprint varnishes. The lower viscosity characteristics in solution of VANCRYL 65 allow the preparation of high solids inks and coatings, where high gloss and rapid drying are essential. Coatings prepared with VANCRYL® 65 have high gloss, scuff resistance, hardness, and excellent resolubility. VANCRYL® 65 is compatible with most acrylic and maleic resins. VANCRYL® 65 is also effective as a protective colloid in the production of styrene acrylic copolymer emulsions.

ACRYSOL™ ASE-75 Thickener is an acid containing, acrylic emulsion copolymer. When the emulsion is diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. ACRYSOL™ ASE-75 Thickener is effective in improving mid to low shear rate (Brookfield) viscosity, resulting in coatings that have highly shear thinning characteristics.

Alpate 1165 is aluminium paste with mineral spirit and naphtha solvents.

Polyfill 403 is a series alumina trihydrate products are used extensively in elastomers, thermoset plastics, thermoplastic and coating applications where optimum physical properties and surface finish qualities are critical. Use of fine grind Polyfill series products increases flame retardancy and smoke suppression. Polyfill/PolyJet alumina trihydrate products are tightly controlled by Cimbar Performance Minerals ISO 9001:2015 quality program.

TEGO® Phobe 1401 N is an amino-siloxane emulsion for the hydrophobization of coating formulations. It reduces water up take and generates a water-beading effect.

DERMULSENE® TR 602 is an aqueous, solvent free resin based on terpene phenolic resin.

DOP is still widely used as a plasticizer in selected applications where volatiles are less of an issue. It is also used as a hydraulic fluid and as a dielectric fluid in capacitors. DOP was the most widely used material as a plasticizer in manufacturing of articles made of PVC. Due to toxicity reasons, its usage has dropped and has been replaced by lower volatile phthalate and phthalate free products in some PVC and other applications.

Superior Graphite 7005939 is a typical synthetic graphite product made from narrow- sized virgin electrodes using Superior Graphite’s dedicated milling and screening technology. Main uses are stabilization of coefficient of friction, wear reduction, and increase in electrical and thermal conductivity.

EBECRYL® LEO 10801 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® LEO 10801 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. EBECRYL® LEO 10801 has been specifically developed to formulate UV/EB curable inks with low extractables and low odor for indirect food contact applications.

Synthomer ADS H206 is a low molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems.

VERSAL YELLOW 4G is a pigment used in flexography, gravure printing, letterpress, and offset lithographic printing. It is compatible with nitrocellulose and is designed to enhance color in various printing applications.

CLEAR-BLOC® 100 C is surface coated talc thet are produced from high purity ore to provide high brightness, clarity, low iron content, for use as an anti-block additive in LDPE and LLDPE film applications where blocking, greater polymer stability with improved optical properties are required. CLEAR-BLOC® 100 C is platy, hydrophobic, non-abrasive, and chemically inert and are approved for food contact applications. CLEAR-BLOC® 100 C is produced with a priority process grinding system to improve consistency and uniformity of the material. CLEAR-BLOC® 100 C is available in powder form and in a CS design which increases the bulk density from 12 lbs to 60+ lbd for feed systems requiring a quick mix and complete dispersion of the sized material while increasing the throughput of your line.

VANCRYL® 989 is a high glass transition temperature acrylic emulsion for the graphic arts industry. Excellent gloss and fast drying rates can be obtained by utilizing VANCRYL® 989 in inks and coatings. It is suitable for both flexographic and gravure printing on paper substrates. VANCRYL® 989 has excellent compatibility with pigment dispersions and alcohols. Inks formulated with this product have good transfer, printability, and resolubility. Because it is a hard polymer, VANCRYL® 989 can also be formulated as a high gloss over print varnish with very good heat, water, oil, and scuff resistance.

CARPOL® GP-3000 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 3000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-3000 may also be included as a component in other urethane products and formulations.

TEGO® Wet 251 is a highly active siloxane-based substrate wetting additive. It shows good substrate wetting properties and is suitable for a broad range of coatings. It is very compatible and recoatable.