EBECRYL® LEO 10801

EBECRYL® LEO 10801 is characterized by:
Very good lithographic behavior
Good pigment wetting
UV/EB cured products based on EBECRYL® LEO 10801 are characterized by the following performance properties:
Fast curing
Good solvent resistance
High gloss
Low extractables
Low odor
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives and photoinitiators.

EBECRYL® LEO 10801 is recommended for use in:

• Lithographic and flexographic inks
• Offset OPV
• Inks and coatings for indirect food packaging and related applications

EBECRYL® LEO 10801 can be diluted with the low extractable/low odor diluting acrylates EBECRYL LEO 10501 and EBECRYL LEO 10502.

The specific reactive diluents used will influence performance properties such as hardness and flexibility.

• The recommended storage temperature for EBECRYL® LEO 10801 is 4°C to 40°C (39°F to 104°F).
• Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
• This might cause uncontrollable polymerization of the product with the generation of heat.
• Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
• Procedures that remove or displace oxygen from the material should be avoided.
• Do not store this material under an oxygen free atmosphere.
• Dry air is recommended to displace material removed from the container.
• EBECRYL® LEO 10801 should be used within 2 years of receipt.

The following mutagenicity studies have been conducted in compliance with Good Laboratory Practice standards and according to the specific OECD Guidelines for Testing of Chemicals as follows:

• Ames test – OECD 471
• Mouse micronucleus test – OECD 474

In conclusion, based on the weight of the evidence of available mutagenicity test results, EBECRYL LEO 10801 is considered a nongenotoxic product

The recommended storage temperature for EBECRYL® LEO 10801 is 4°C to 40°C (39°F to 104°F). Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. EBECRYL® LEO 10801 should be used within 2 years of receipt.