Products

AP 5945 is a low viscosity, non-blushing, cycloaliphatic amine modified hardener for epoxy resin based lacquers and coatings.

NANOPOX® C 620 shows the highest performance in scratch and abrasion resistance without influencing the gloss or transparency of the cured cationic UV-coating

TEGO® AddBond DS 1300 improves adhesion of water borne coatings on steel, galvanized steel, aluminum, and plastics.

NANOCRYL® C 140 shows the highest performance in scratch and abrasion resistance without influencing gloss or transparency of the cured UV-coating.

Bermocoll® EBS 351 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

RHOPLEX® EC-2848 is designed to provide elastomeric coatings with an excellent balance of elongation, tensile strength and dirt pickup resistance over a wide temperature range. The elongation properties of the polymer allow coatings to bridge dimensionally unstable cracks without rupturing. It also provides an excellent balance of toughness and elasticity at both low and high temperatures without sacrificing dirt pickup resistance. Coatings based on RHOPLEX® EC-2848 retain an attractive appearance as they age.

CARPOL® GP-6015 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6000 Da. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., as this polyol has low total unsaturation levels and an antioxidant package tailored for this type of market.

ACRYSOL™ RM-6000 Rheology Modifier is a nonionic urethane rheology modifier based on solvent-free1 technology offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and leveling with high film build while maintaining good sag resistance. ACRYSOL™ RM-6000 Rheology Modifier has demonstrated utility in a broad range of emulsions, including the “newer generation”, low-VOC types such as RHOPLEX™ SG-30 Acrylic Emulsion and RHOPLEX™ ML-300 Acrylic Emulsion.

TEGO® AIREX 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent borne, radiation-curing and high solids coatings and inks. Very suitable for high build and high viscosity applications.

UCECOAT® 7200 is a novel energy curable solvent-free urethane acrylate in water developed for hardcoat applications. This urethane acrylate is highly reactive upon cure and exhibits high scratch and abrasion resistance after curing. Due to its low viscosity, it can be used as the main binder in waterborne hardcoat formulations for spray or curtain coater. UCECOAT® 7200 can be blended with other waterborne UV resins (after pH neutralization) to increase solids content and/or hardness property.

SharkDISPersion MW2™ is a vinyl-based resin used in paints and coatings.

VPS SIVO 260 is a novel multifunctional siloxane adhesion promoter with aminofunctionalities that can be used for various applications. VPS SIVO 260 is mainly dedicated for use in adhesives and sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers®) and RTV-silicones - especially to difficult to stick polycarbonate substrates. In addition, VPS SIVO 260 can lead to adequate adhesive cure and it imparts both additional flexibility and hydrophobicity.

EBECRYL® 4381 is a unsaturated polyester diluted with 30% dipropyleneglycol diacrylate (DPGDA)(1). Coatings based on EBECRYL® 4381 are characterized by good hardness and high gloss

TEGO® Foamex 8820 is an effective bio-based defoamer concentrate based on organic polymer technology. It has broad food contact compliances with green and renewable contents. Freeof silicone, solvent, and mineraloil.

EBECRYL® 8414 is a urethane acrylate developed for liquid energy curable thermoforming inks. Flexographic inks made with EBECRYL® 8414 exhibit excellent thermoformability with draws up to 1" without cracking, blistering, separation or loss of adhesion. This medium viscosity oligomer has good pigment wetting capability and ink performance.