Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Product Code
- MITM00583
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Product Performance
UCECOAT® 7200 is characterized by:
- Low viscosity
- Low viscosity
UV/EB cured coatings based on UCECOAT® 7200 are characterized by the following performance properties:
- High solids content
- Very high reactivity
- Very high hardness and scratch resistance
- Excellent stain resistance
- Direct adhesion to various plastic substrates
The actual properties of UV/EB cured products also depend on the selection of other formulation components, such as additives and photoinitiators, as well as curing conditions.
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Markets
- Applications
- Product Applications
Formulated UV/EB curable products containing UCECOAT® 7200 are typically applied by spray, spin coating, dip coating, curtain coating and common roll-to-roll coating processes. Additional methods may also be used.
UCECOAT® 7200 is recommended for use in energy cured protective hardcoats for:
- Consumer electronics (casing & display)
- Optical film
- Metallized plastics
Properties
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Protect the product from freezing. Care should be taken not to expose the product to high temperature conditions or direct sunlight. Containers should be kept closed and away from materials that react with water. Bacteriological contamination can occur if the product is stored for an extended period in a container which is not sufficiently sealed or clean. Storage and handling should be in stainless steel, amber glass, or amber polyethylene containers. After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage. Do not store this material under an oxygen free atmosphere.
Other
- Appearance
- White
- Appearance (SDS)
- Liquid resin
- Color (SDS)
- Yellowish
- Flammability (SDS)
- Non flammable
- Item Number
- Odor (SDS)
- Acrylate
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Oxidizing Properties (SDS)
- None
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 3.0-5.0 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d - Physical Properties
Value Units Test Method / Conditions Density 1.1 g/mL g/mL At 25°C Particle Size 300.0-500.0 nm nm Viscosity max. 700.0 cPs cPs At 25°C - Material Composition
Value Units Test Method / Conditions Non-Volatile Content 63.5-66.5 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C Specific Gravity (SDS) 1.05 - Vapor Pressure (SDS) 2.3 kPa kPa At 20°C Viscosity (SDS) 300.0-700.0 mPa.s mPa.s dynamic Viscosity (SDS) 300.0-700.0 mPa.s mPa.s Volatile Content (SDS) 33.5-36.5 %(W/W) %(W/W) pH (SDS) 2.0-5.0 -