Products

CYMEL® XW 3106 Resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low-temperature cure potential for this crosslinker provides the opportunity to formulate high-performance coatings for heat-sensitive substrates. These systems have excellent early hardness, resistance properties, appearance, and hot/cold cycle flexibility.

EMERAL EMR D8130 is an effect pigment and pigment used in coatings.

SETAMINE® 19-1001 is a binder and resin used in surface coating applications.

CYMEL® U-93-210 Resin is an n-butylated urea formaldehyde resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is recommended in primer formulations which are to be topcoated and rebaked.

ZINCUM SW 2309 is in low bulk density, fine white powder.

H.B. Fuller® PD-0128 is a binder and resin with excellent scrub resistance, used in waterborne adhesives for adhesives, sealants, and architectural coatings.

EBECRYL® 820 is a low viscosity polyester acrylate oligomer, with exceptional pigment wetting properties. This combined with the low viscosity of this material makes it ideal as a pigment grinding resin. EBECRYL® 820 also gives a fast cure response when formulated with other oligomers and cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 820 is used for the preparation of pigment pastes with high pigment loading. This can be produced using a triple roll mill or bead mill. EBECRYL® 820 can be used for grinding all process colors and spot colors. EBECRYL® 820 has been specifically developed to formulate UV/EB curable inks for sensitive applications such as food packaging.

EBECRYL® 244 is an aliphatic urethane diacrylate diluted 10% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA) (1). EBECRYL® 244 exhibits light color and good cure response. Films of EBECRYL® 244 cured by ultraviolet light (UV) or an electron beam (EB) demonstrate good flexibility, toughness, abrasion and water resistance, and are resistant to yellowing.

CYMEL® 300 Resin is a highly methylated melamine crosslinking agent and is the purest form of hexa(methoxymethyl)melamine available in our product line. Its high degree of alkylation coupled with its high monomer content makes CYMEL® 300 resin an excellent crosslinker for applications where film flexibility is a premium, such as required in some coil and can coatings.

HP7279-Medium Oil Alkyd is a chain-stopped medium oil alkyd resin that is based on a blend of semi drying and drying oils. It is dissolved in Aromatic 100 for use in applications that require higher flashpoints.

CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes CYMEL® UB-30-B resin suitable for a wide range of industrial baking applications.

EMERAL EMR DF520 is an effect pigment and pigment used in coatings.

TPGDA-A is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TRIPROPYLENE GLYCOL DIACRYLATE is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. TRIPROPYLENE GLYCOL DIACRYLATE is a grade of tripropylene glycol diacrylate with lower inhibitor content than the standard grade (TPGDA).

KRONOS® 2450 is a versatile pigment for a wide range of plastics.

ADDITOL® DX is a eutectic liquid photoinitiator vehicle designed to simplify and shorten the process of formulating ultraviolet (UV) cured flexographic, lithographic, and screen printing inks. ADDITOL® DX provides surface and in-depth cure to dark colored UV inks and is compatible with common UV monomer, oligomer, and vehicle choices.