Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Oligomer, Monomer
- Product Code
- MITM11068
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL® 820 is characterized by:
- Low viscosity
- Excellent pigment wetting properties
- Good cure response
The ability to produce high pigment loading pigment pastes allows the ink formulator more latitude in formulating, as less pigment paste is required toachieve a given optical density
Applications & Uses
- Coating End Applications
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- 3-roll Mill Pigment Paste Formulations
Yellow Magenta Cyan EBECRYL 820 52.8 49.5 47.3 Stabilizer 1 1 1 Solsperse* 22000 1.7 Solsperse 5000 1.1 Solsperse 39000 4.5 Solsperse 24000 45 5.6 Pigment DGR 40 Pigment 4 BY 45 Pigment GLO 45 The properties of UV/EB cured formulations also depend on other components such as reactive diluent(s), additives and photoinitiators.
- Product Applications
- High loading pigment paste formulations prepared using EBECRYL® 820 may be used in the production of UV/EB curable inks intended for use in flexography, lithography, gravure or potentially ink-jet.
- EBECRYL® 820 is recommended for use in flexographic inks and coating for indirect food packaging and related applications.
Properties
- Physical Form
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Liquid resin
- Color (SDS)
- Clear colorless to pale yellow
- Item Number
- Odor (SDS)
- Ester like
- Other Hazards
- Polymerization may occur from excessive heat ,contamination or exposure to direct sunlight , Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates.
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Acid Value 4.0 mg KOH/g mg KOH/g - Optical Properties
Value Units Test Method / Conditions Color Scale max. 10.0 Gardner Gardner Gardner Color Scale - Physical Properties
Value Units Test Method / Conditions Density 1.16 g/mL g/mL At 25°C Flash Point min. 100.0 °C °C Setaflash Storage Temperature 39.0-104.0 °F °F Viscosity 550.0 cPs cPs At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.08 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Vapor Pressure (SDS) max. 1.33 - Volatile Content (SDS) max. 0.05 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 -