Products

CYMEL® 1133 Resin is a highly methylated, n-butylated melamine crosslinker with a high degree of alkylation. It has a higher butoxymethyl content and higher monomer content compared to CYMEL® 1130 resin. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 1133 resin suitable for automotive topcoat applications and general metal finishes requiring improved durability and resistance properties.

DOCCO 006 Gloss Oil is a 60% solids gloss rosin varnish dissolved in solvent naphtha. In comparison to DOCCO #007, DOCCO #006 Gloss Oil dries slower and to a lower hardness.

EBECRYL® 1365 is a hexa-functional silicone modified urethane acrylate diluted in 50% of EBECRYL® 160. EBECRYL® 1365 can be used to prepare UV/EB curable coatings with low surface energy providing anti-stain and easy-to-clean properties. Additionally EBECRYL® 1365 can be used as a processing agent in matt and excimer curable formulations, facilitating a uniform film creation which in turn significantly increases the process robustness.

AP 5905 is a low viscosity, modified Cycloaliphatic amine adduct hardener for epoxy resin based lacquers and coatings.

HFGEL 120-Q is an organoclay for solvent-based systems of low to medium polarity.

DzBh Baling® SIS YH-1124 is a linear styrene/isoprene block copolymer.

CYMEL® 1161 Resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. CYMEL® 1161 Resin is especially recommended for automotive topcoats, general metal finishes, and coil coatings

EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for applications requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL® 8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, and resistant to yellowing. EBECRYL® 8896 is compatible with variety of fillers, pigments, waxes, and polymeric beads allowing formulator maximum formulating latitude to create a number of haptic properties ranging from a velvety/silky feel to EBECRYL® 8896’s intrinsic rubbery feel.

APODIL 1023 is a dimer acid based diglycidyl ester. The product is used as reactive diluent for high viscosity epoxy resins, which imparts flexibility, impact resistance and toughness.

EBECRYL® 249 is an aliphatic urethane methacrylate. Films of EBECRYL® 249 cured by electron beam (EB) or ultraviolet light (UV) exhibit good exterior durability, good adhesion and a high order of scuff and abrasion.

EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDDA)(1) and tripropylene glycol diacrylate (TPGDA) . EBECRYL 745 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion on difficult substrates.

EBECRYL® 150 is an ethoxylated bisphenol A diacrylate commonly used as reactive diluent in UV/EB cure applications. EBECRYL® 150 can improve the cure response, hardness, and chemical resistance of UV/EB curable coatings and inks while maintaining good adhesion, and without imparting brittleness.

SharkDISPersion WX2™ is a vinyl-based binder, resin, and cobinder that offers antibacterial and anti-static properties, improved formulation latitude and performance, UV resistance, and water resistance.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

Synthomer ADS H190 is a medium to high molecular weight, solid polyvinyl acetate. It is and adhesives or met designed for use in solvent based coatings, inks extrusion systems. profile additive in Synthomer ADS H190 can also be used as a low unsaturated polyester processes. composites, typically pultrusion and BMC processses