Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM12354
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
UV/EB cured products based on EBECRYL® 8896 are characterized by the following performance properties:
- Rubbery feel
- High flexibility
- Good abrasion resistance
The haptic properties of UV/EB cured formulations containing EBECRYL® 8896 will depend on the selection of the other formulation components, such as co- resins, suitable additives, reactive diluents and photoinitiators.
Applications & Uses
- Applicable Processes
- Application Method
- Coating End Applications
- Cure Method
- Product Applications
Formulated UV/EB curable products containing EBECRYL® 8896 may be applied by spray coating, screen, roller and curtain coating methods. EBECRYL® 8896 is recommended for use in:
- Haptic coating on plastics and films
- Flexible coatings
- In-mold decoration
Properties
- Physical Form
- Notes
¹- Measured on an 80 micron EB-cured film. Stress-strain testing was carried out at 23°C, 50% relative humidity, 50 mm/min. crosshead speed.
²-Maximum of the tan(δ) peak measured by dynamical mechanical analysis (1 Hz,tensile mode).
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Waxy
- Appearance (SDS)
- Viscous liquid
- Color (SDS)
- Clear to hazy
- IATA/ICAO Proper Shipping Name
- Resin solution
- IATA/ICAO UN Number
- UN1866
- IMO/IMDG Proper Shipping Name
- Resin solution
- IMO/IMDG UN Number
- UN1866
- Immiscible In (SDS)
- Water
- Item Number
- Odor (SDS)
- Ester like
- Other Hazards
- Polymerization may occur from excessive heat ,contamination or exposure to direct sunlight , Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates.
- TDG Canada Proper Shipping Name
- Resin solution
- TDG Canada UN Number
- UN1866
- USA/DOT Proper Shipping Name
- Resin solution
- USA/DOT UN Number
- UN1866
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 1.0 Gardner Gardner Gardner Color Scale at 50°C - Mechanical Properties
Value Units Test Method / Conditions Tensile Elongation 50.0 % % Tensile Modulus 1450.0 psi psi Tensile Strength 479.0 psi psi - Physical Properties
Value Units Test Method / Conditions Density 1.06 g/mL g/mL At 25°C Glass Transition Temperature (Tg) -26.0 °C °C Dynamic Mechanical Analysis (DMA) Viscosity 10000.0 mPa.s mPa.s At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0-200.0 °C °C Density (SDS) 1.06 g/cm³ g/cm³ Flash Point (SDS) 23.0 °C °C Viscosity (SDS) 5000.0-10000.0 mPa.s mPa.s At 60°C Volatile Content (SDS) 20.0 %(W/W) %(W/W)