Products

EBECRYL® 645 functions as a binder and resin in CASE ingredients and is compatible with wood substrates.

K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that was created to lower the VOC content of a coating more than other K-FLEX® 500P plasticizers. It was specifically designed for the coatings industry where very low VOC content is required or other application areas where low VOC content is critical.

HR-440 is an organic substance modified by a special process, which is easily dispersed in powder coating and effectively reduces powder. It can reduce he problem of handprint left by touch in paint coating efficiently.

EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.

CRAYVALLAC® WN-1220 is a micronised non polar polyethylene wax and is particularly characterised by its hardness and toughness. CRAYVALLAC® WN-1220 provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties.

CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. CYMEL® 250 Resin is similar reactivity to conventional n-butylated melamine resin. A formulation by using CYMEL® 250 Resin can achieve lower VOC, compared to a formulation by using conventional n-butylated melamine formaldehyde resin.

VANCRYL® 989 is a high glass transition temperature acrylic emulsion for the graphic arts industry. Excellent gloss and fast drying rates can be obtained by utilizing VANCRYL® 989 in inks and coatings. It is suitable for both flexographic and gravure printing on paper substrates. VANCRYL® 989 has excellent compatibility with pigment dispersions and alcohols. Inks formulated with this product have good transfer, printability, and resolubility. Because it is a hard polymer, VANCRYL® 989 can also be formulated as a high gloss over print varnish with very good heat, water, oil, and scuff resistance.

VANCRYL® 960 is a very low glass transition temperature acrylic polymer for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. These properties are needed when converting packaging printing from solvent-based formulations to water-based formulations. VANCRYL® 960 is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used dispersion resins. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, and waxes. VANCRYL® 960 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.45.

EBECRYL® 3420 is a low viscosity, modified epoxy acrylate with good pigment wetting ability. In UV offset, the final ink produced with this resin exhibits an enhanced ink water balance and good misting. EBECRYL® 3420 can be used to produce a UV flexo ink with good flow, high gloss and high reactivity.

UVACURE® 1600 is thermally stable iodonium salt photoinitiators are used to induce the polymerization of epoxides and other cationically polymerizable materials on exposure to UV light. UVACURE® 1600 is p-(octyloxyphenyl)phenyliodonium hexafluoroantimonate in solid form. It is compatible with most UV cationic cure systems and is especially useful for the rapid polymerization of thin clear coatings on metal, plastic, and paper substrates. Coatings cured using UVACURE® 1600 generally exhibit excellent adhesion, particularly on metal substrates.

EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. EBECRYL® LEO 10601 exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink water balance and low misting. EBECRYL® LEO 10601 can also be used to produce UV flexo inks with good flow, high gloss and high reactivity.

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

EBECRYL® 221 is a hexafunctional aromatic urethane acrylate oligomer which provides very fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 221 exhibit high hardness and solvent resistance.

CYMEL® U-1054-8 is a urea formaldehyde (UF) resin, specifically urea polymerized with formaldehyde and butylated. It is used in surface coating applications.