Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM00381
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
- Ebecryl®3420 is characterized by :
- Xi free
- low viscosity
- improved flexibility
- UV/EB cured products based on Ebecryl®3420 are characterized by the following performance properties:
- In UV offset lithography:
- good pigment wetting
- improved ink water balance
- good viscosity/tack relation
- reduced misting
- In UV flexo:
- good pigment wetting (especially for carbon black)
- high gloss
- high reactivity
- flexibility
- The properties of UV/EB cured products are dependent on the components used in the formulation. Formulations can contain reactive diluent(s), additives and photoinitiators.
- Ebecryl®3420 is characterized by :
Applications & Uses
- Coating End Applications
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Application
Ebecryl®3420 is especially suited for UV offset lithography and UV flexo inks but can of course be used for other applications such as screen, gravure, OPV.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Technical Details & Test Data
- Viscosity Reduction
- Ebecryl®3420 can be diluted with reactive monomers such as 1,6 hexanediol diacrylate (HDDA)¹, trimethylolpropane triacrylate (TMPTA)¹, tripropyleneglycol diacrylate (TPGDA)¹, octyl/decyl acrylate (ODA)¹ and oligotriacrylate (OTA 480)¹.
- The specific reactive diluent(s) used will influence performance properties such as hardness and flexibility.
- ¹ HDDA, TMPTA, TPGDA, ODA and OTA 480 are produced byAllnex
Safety & Health
- Safety Precautions
- The following is a summary of the precautions to be taken when handling Ebecryl®3420.
- Although Ebecryl®3420 is not classified as irritant, it is frequently diluted with reactive monomers that are irritant.
- Therefore, appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapors.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
- Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight.
- This might cause uncontrollable polymerization of the product with generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Do not store this material under an oxygen free atmosphere.
- Use dry air to displace material removed from the container.
- This material should not be stored for more than 2 years.
Other
- Appearance (SDS)
- Liquid
- Color (SDS)
- Clear pale yellow
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Acrylate
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 3.0 Gardner Gardner Color Scale - Chemical Properties
Value Units Test Method / Conditions Acid Value max. 2.0 mg KOH/g - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 yr - Physical Properties
Value Units Test Method / Conditions Viscosity 22000.0 mPa.s At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C Density (SDS) min. 1.0 g/cm³ Flash Point (SDS) min. 100.0 °C Vapor Pressure (SDS) max. 1.33 hPa at 20°C Volatile Content (SDS) max. 0.5 %(W/W)