Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Function
- Adhesion Promoter, Coupling Agent
- Product Code
- MITM00361
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Features
EBECRYL® 170 is characterized by:
- Low viscosity
- Acid functionality
UV/EB curable formulated products containing EBECRYL® 170 are characterized by:
- Good adhesion to metal substrates
- Improved reactivity (relative to EBECRYL® 168)
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives and photoinitiators.
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Markets
- Applications
- Product Applications
Formulated UV/EB curable products containing EBECRYL® 170 may be applied via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain and immersion coating methods. EBECRYL® 170 is recommended for use in:
- General metal coatings and primers
- Coatings for galvanized pipe and tube
- Coil coatings
- Solder resist formulations
Properties
- Physical Form
- Notes
(1) Theoretical determination based on the undiluted oligomer.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
- Wash thoroughly after handling. Keep container tightly closed.
- Use with adequate ventilation.
- Contamination of EBECRYL® 170 with acetone or other ketones can cause coloration of the product during storage.
Other
- Appearance
- Clear to slightly opalescent
- Appearance (SDS)
- Clear viscous liquid
- Color (SDS)
- Colorless
- Item Number
- Odor (SDS)
- Acidic
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Acid Value 270.0-330.0 mg KOH/g mg KOH/g - Material Composition
Value Units Test Method / Conditions Oligomer Content 100.0 %(W/W) %(W/W) - Optical Properties
Value Units Test Method / Conditions Color Scale max. 6.0 Gardner Gardner Gardner Color Scale - Physical Properties
Value Units Test Method / Conditions Density 1.33 g/mL g/mL at 25°C Storage Temperature 39.2-104.0 °F °F Viscosity 2250.0-3750.0 mPa.s mPa.s at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 320.0-325.0 °C °C Density (SDS) 1.35 g/cm³ g/cm³ at 23°C Flash Point (SDS) min. 130.0 °C °C Pensky-Martens Closed Cup (PMCC) Partition coefficient n-octanol/water (SDS) -1.0 - OECD 117 n-Octanol/Water Solubility In Water (SDS) 486.0 g/L g/L at 20°C Vapor Pressure (SDS) 0.81 Pa Pa at 20°C Viscosity (SDS) 2250.0-3750.0 mPa.s mPa.s at 25°C Volatile Content (SDS) max. 0.3 % % - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d