Products

AP1405 is Low viscosity, reactive, mannish-based amine hardener for epoxy resins based lacquers and coatings.

AP 5645 is a low viscosity, modified aliphatic amine hardener for epoxy resins based lacquers coatings.

PARALOID™ B-82 51% Resin is a softer, general purpose acrylic resin. Films based on PARALOID™ B-82 51% Resin Thermoplastic Solution Resin (51%) exhibit the water-white color, durability, flexibility and chemical resistance characteristic of acrylic polymers. PARALOID™ B-82 51% Resin Thermoplastic Solution Resin (51%) is well suited for general product finishing where a softer resin is required. It can be used over metal, plastics, wood and masonry.

AP 1032 is a low viscosity, reactive, mannish-based amine hardener for epoxy resins based lacquers and coatings.

HFGEL 120-OG is is easy to disperse and suitable for lubricating greases based on recovered oil,mineral oil with low kinematic viscosity, partial synthetic oils and other organic fluids.

VERSAL RED 3RLT is a pigment used in offset and lithographic printing.

BS-1C-0 is an organically modified bentonite designed for use in low to medium polarity solvent system.

EBECRYL® 1885 is an undiluted polyesteracrylate resin. Films of EBECRYL® 1885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 1885 is recommended for parquet floor and furniture applications.

Hostavin® 3070 disp. is a 52% aqueous dispersion of an oligomeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration, low extraction and very low tox-profile.

EBECRYL® 860 is an epoxidized soya oil acrylate especially suited to improving the flow and leveling of ultraviolet light (UV) or electron beam (EB) curable inks and coatings. Pigment wetting and adhesion are often enhanced when EBECRYL® 860 is used as a modifier in inks and clear or pigmented coatings on paper and metal.

3M™ Ceramic Microspheres W-410 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

EBECRYL® 608 is a bisphenol A epoxy diacrylate diluted approximately 27% by weight with the reactive diluent OTA- 480, propoxylated glycerol triacrylate. EBECRYL® 608 exhibits light color and very fast cure response. Films of EBECRYL® 608 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness and gloss, low residual odor and excellent chemical resistance.

EBECRYL® 885 is a trifunctional polyester acrylate oligomer. Films of EBECRYL® 885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 885 is recommended for parquet floor coating, wood furniture coating applications and flexible coatings for metal.

EBECRYL® 4654 is an aliphatic urethane acrylate supplied at 60% solids in n-butyl acetate. Films of EBECRYL® 4654 are physically dry after evaporation of the solvent. EBECRYL® 4654 exhibits high reactivity in ultraviolet (UV) and electron beam (EB) energy curable coatings and yields hard polymers. Coatings based on EBECRYL® 4654 demonstrate good exterior durability, resistance to yellowing, and chemical and mechanical resistance properties.

EBECRYL® 895 is a dipentaerythritol hexaacrylate belonging to the acrylics and acrylates chemical family. It functions as a monomer and oligomer in CASE ingredients.