Products

Bermocoll® Prime 1000 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance. and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

CRAYVALLAC® 60X is used in epoxies (EP) and vinyls. It is applied in anti-fouling coatings, chlorinated rubber coatings, primers, and solventborne coatings. The product provides anticaking, recoatability, and sag resistance.

EBECRYL® 284 is an aliphatic urethane diacrylate diluted 12% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL® 284 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, and are resistant to yellowing.

DzBh Baling® YH-1126 is a linear styrene/isoprene block copolymer.

EBECRYL® 8894 is an aliphatic urethane acrylate, diluted in butyl acetate, designed for applications requiring high humidity and abrasion resistance. Films of EBECRYL® 8894 cured via exposure to ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, good toughness and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane.

CYMEL® MB-98 resin is a butylated melamine crosslinker with high degree of alkylation and very low free formaldehyde. It has been specially designed to improve the resistance properties of urea-based acid curing wood coating formulations.

TRIGLYCIDYL ISOCYANURATE (TGIC) JF-77 is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance, weather resistance, adhesive and high temperature performance.

HFGEL 120-N is an organophilic clay optimized for use primarily in aliphatic and other non-polar to medium polarity solvent-based systems. HFGEL 120-N belongs to the newest generation of high performance organoclays, being easy to disperse and self-activating. It can be added at any point in the manufacturing process and can be used to correct finished batches. HFGEL 120-N imparts viscosity increase, sag control and prevents settling of pigments and fillers.

AP 1131 is a low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.

BS-1C-A25 is a new composite clay suitable for using in a broad range of coatings systems including epoxies and unsaturated polyesters. BS-1C-A25 imparts excellent sag resistance, thixotropy and suspension property.

VANCRYL® 927 is a medium glass transition temperature acrylic emulsion for the graphic arts industry. Excellent gloss can be obtained by utilizing VANCRYL® 927 in inks and coatings. Its film formation properties, coupled with its rapid water release, result in very fast drying. It is suitable for both flexographic and gravure printing on paper substrates. VANCRYL® 927 has excellent compatibility with pigment dispersions and alcohols. Inks formulated with VANCRYL® 927 have good transfer, printability, and resolubility for high-quality printing on various paper substrates (including metalized paper) and aluminum foil. VANCRYL® 927 can also be formulated as a high gloss OPV that will very quickly develop water, oil, and scuff resistance.

PURMOL™ 3ST Paste is made of Purmol molecular sieve and castor oil. It includes a synthetic 3A zeolite with a pore size of approximately 3 Angstroms (0.32 nm). This allows for selective adsorption of molecules based on molecular size and polarity. In practice, Purmol adsorbs water but not solvents, resins, or pigments.

Preventol® ON Extra Preservative Solution is an aqueous, alkaline solution of 2-Phenylphenol.

AP 5980 is low viscosity modified cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. It exhibits high chemical resistance.

AP 5965 is a curing agent used in CASE (Coatings, Adhesives, Sealants, and Elastomers) applications. It plays a key role in the curing process, promoting crosslinking and enhancing the strength and durability of resin systems in various industrial applications.