Products

EBECRYL® 438 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent OTA-480. EBECRYL® 438 exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Films of EBECRYL 438 cured by ultraviolet light (UV) display good adhesion to metals, plastics and paper.

Polycin® D-140 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. Polycin D-140, with its very low viscosity and secondary hydroxyl groups, will allow for the formulation of higher system solids with improved VOC reduction and longer pot-life. Polycin® D-140 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

EBECRYL® 871 is an energy curable polyester acrylate. This varnish was developed for use in lithographic inks, and can be used in both the pigment dispersion and letdown portions of the ink. Inks made with EBECRYL® 871 exhibit good color development and excellent printability.

EBECRYL® 524 is an acid-modified polyester resin diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). It exhibits very low color and moderate acid value. EBECRYL 524 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion to a variety of substrates including paper, plastics and metal. It is particularly useful in UV/EB laminating adhesives.

TEGO® Wet 280 is a highly active siloxane-based substrate wetting additive. It shows good atomization for spray applications in co-solvent containing water borne formulations. It is compatible and recoatable.

AEROSIL® 300 Coating is a hydrophilic fumed silica with a specific surface area of 300 m²/g. It provides a very strong rheological effect.

HDDA is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, weathering and adhesion are desired in combination with excellent water resistance.

TEGO® Wet KL 245 is a highly active siloxane-based substrate wetting additive. It shows very good substrate wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for water borne and solvent borne coatings.

EBECRYL® 6603 is an aromatic urethane acrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 6603 cured by ultraviolet light (UV) or an electron beam (EB) feature good toughness, flexibility and abrasion resistance. EBECRYL® 6603 is useful as a modifier for harder resins such as epoxy acrylates.

EBECRYL® 605/40 is a bisphenol A epoxy diacrylate diluted approximately 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

PARALOID™ A-21 30% Resin is a very hard methyl methacrylate type polymer with enhanced adhesion properties. It is provided as a 30% solution in a toluene/butanol system. The polymer is also available in a solid grade form. Lacquers formulated with PARALOID™ A-21 30% Resin possess excellent intercoat adhesion, hardness, and outdoor durability. PARALOID™ A-21 30% Resin will air-dry rapidly to give clear, colorless films that have excellent resistance to yellowing.

TEGO® Glide 450 provides excellent flow and leveling combined with strong slip properties. It is recoatable and can be used in solvent and waterborne coatings.

EBECRYL® 3701 is a modified bisphenol A epoxy diacrylate. EBECRYL® 3701 imparts flexibility and toughness to ultraviolet light (UV) or electron beam (EB) cured coatings and inks while maintaining such desirable properties as fast cure response and superior chemical resistance that are typical of standard epoxy acrylates.

EBECRYL® 3701-20T is the modified bisphenol A epoxy diacrylate, EBECRYL 3701, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. Films of EBECRYL® 3701-20T cured by ultraviolet light (UV) or electron beam (EB) exhibit flexibility, abrasion resistance, high gloss, and superior chemical resistance.

EBECRYL® 809 is a modified polyester acrylate designed to exhibit greater flexibility and impact resistance than typical polyester acrylates. Films of EBECRYL® 809 cured by ultraviolet light (UV) or electron beam (EB) provide good flexibility, high gloss, toughness and surface hardness.