Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Function
- Reactive Diluent
- Product Code
- MITM00481
- Single Ingredient
- Yes
- Synonyms
- 1,2-Bisacryloyloxyhexane, 1,6-HDDA, 1,6-Hexamethylene diacrylate, 1,6-Hexamethylenediol diacrylate, 1,6-Hexandiol diacrylate, 1,6-Hexanediyl diacrylate, 1,6-Hexenediol diacrylate, 1,6-Hexyleneglycol diacrylate, Hexamethylene acrylate, Hexamethylene diacrylate, Hexamethylenediol diacrylate, Hexamethyleneglycol diacrylate, Hexaneglycol diacrylate, Hexylene-1,6-diacrylate
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Performance
HDDA is characterized by:
- Very low viscosity
- Low color
- Efficient reduction of oligomer viscosity
UV/EB curable formulated products containing HDDA are characterized by:- Improved elasticity
- Improved weathering
- Good cure response at low cross-link density
- Improved adhesion
- Good water resistance
The actual properties of UV/EB cured products also depend on the selection of the other formulation components such as oligomers, additives and photoinitiators.
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Product Applications
HDDA is especially useful in UV/EB curable coatings and inks where improved adhesion, increased elasticity and good weathering are desired. HDDA is recommended for use in:
- Improved adhesion to plastics, metal and glass
- Exterior durable coatings and inks
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Clear liquid
- Color (SDS)
- Colorless to yellow
- Item Number
- Odor (SDS)
- Acrylate ester
- Oxidizing Properties (SDS)
- Not oxidising
- USA/DOT UN Number
- UN3082
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 40.0 Pt-Co Pt-Co - Chemical Properties
Value Units Test Method / Conditions Acid Value max. 0.4 mg KOH/g mg KOH/g - Physical Properties
Value Units Test Method / Conditions Density 1.02 g/mL g/mL At 25°C Flash Point min. 100.0 °C °C SetaFlash Closed Cup Viscosity 5.0-8.0 mPa.s mPa.s At 25°C - Material Composition
Value Units Test Method / Conditions Solvent Content max. 0.09 %(W/W) %(W/W) residue - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) min. 235.0 °C °C Boiling Point (SDS) 259.0 °C °C Flash Point (SDS) 164.0 °C °C Cleveland Open Cup Log Partition Coefficient (Log Pow) (SDS) 2.81 - at 25°C Melting Point (SDS) 5.0-10.0 °C °C Solubility In Water (SDS) 343.0 mg/L mg/L at 20°C Specific Gravity (SDS) 1.0219 - at 20°C Vapor Pressure (SDS) 6.0 hPa hPa At 20°C Viscosity (SDS) 6.9 mPa.s mPa.s at 20°C, low viscous liquid Volatile Content (SDS) max. 0.3 %(W/W) %(W/W)