Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM00456
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
- Excellent pigment wetting
- Good water balance
- Excellent printability
- Good reactivity
- Low misting
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
EBECRYL® 871 is recommended for wet or dry offset inks. It is compatible with other polyester or epoxy acrylates and can be used in conjunction with specialty polyesters such as EBECRYL® 436 and 438 to promote adhesion to plastics and provide film integrity.
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear amber liquid
- Appearance (SDS)
- Liquid resin
- Color (SDS)
- Amber
- Item Number
- Odor (SDS)
- Acrylate
- Other Hazards
- Polymerization may occur from excessive heat ,contamination or exposure to direct sunlight , Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates.
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Acid Value max. 12.5 mg KOH/g mg KOH/g - Optical Properties
Value Units Test Method / Conditions Color Scale max. 10.0 Gardner Gardner Gardner Color Scale - Physical Properties
Value Units Test Method / Conditions Density 1.1 g/mL g/mL At 25°C Oligomer Tack 12.0-14.0 - Thwing-Albert Electronic Inkometer at 90°F, 400 rpm, 3 minutes Storage Temperature 39.2-104.0 °F °F Viscosity 48000.0-57000.0 - At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.11 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Cleveland Open Cup Vapor Pressure (SDS) 0.013 - At 25°C Viscosity (SDS) 45000.0-60000.0 - at 25°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 -