Products

EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDDA)(1) and tripropylene glycol diacrylate (TPGDA) . EBECRYL 745 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion on difficult substrates.

EBECRYL® 740/40TP is an acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). This resin is designed to provide improved adhesion to difficult substrates.

EBECRYL®741 is an adhesion promoting resin with excellent pigment dispersion properties for radiation curable screen inks. It is designed for general purpose application on many treated plastic substrates. It can also be used as a let-down resin in combination with EBECRYL® epoxy acrylates, polyester acrylates and urethane acrylates.

EBECRYL® 811 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates.

EBECRYL® 3415 is a modified bisphenol A epoxy acrylate diluted with 40% 1, 6-hexanediol diacrylate (HDDA). This acrylated epoxy was developed for ultraviolet light (UV) curable screen printing, and exhibits excellent reactivity and good adhesion to various non-porous substrates. EBECRYL® 3415 meets all regulatory requirements and is no longer subject to the Significant New Use Rule (SNUR).

EBECRYL® 812 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate. Its low viscosity and outstanding color development properties make this product ideal for high pigment content, low viscosity flexo inks. Inks made using this vehicle have excellent adhesion to a variety of substrates common to flexo printing.

EBECRYL® 8413 is designed as the pigment grind oligomer for UV cured thermoformable ink applications and is designed for use in conjunction with the letdown oligomer, EBECRYL® 1300. EBECRYL® 8413 exhibits good milling properties and has very high elongation (550%). When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

PARALOID™ B-60 100% Resin permits the manufacture of hard, heat-resistant coatings that exhibit fast tack-free time, rapid hardness development, and very good dry and wet adhesion to Plexiglas acrylic, ABS, and polystyrene plastics. It is recommended for use in lacquers for automotive plastics and in clear finishes for furniture plastics.

EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. When used together with EBECRYL® 8413, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

LOTRYL® BESTPEEL 2407 is a ready-to-use thermoplastic composition designed to make peelable heat seal layers onto various substrates. The base resin is a random ethylene-methyl acrylate copolymer.

PARALOID™ B-66 100% Resin thermoplastic acrylic resin is an excellent general-purpose resin with the same characteristics as the solution grade. In appropriate solvents, PARALOID™ B-66 100% Resin acrylic resin forms clear solutions, which air-dry extremely fast to form hard, colorless films which display excellent block resistance and color retention.

EBECRYL® 303 is a polymeric resin diluted 45% with the monomer 1,6-hexanediol diacrylate (HDDA)(1). This material is designed to be used alone or in combination with other UV/EB curable oligomers to provide improved adhesion of inks and coatings on plastic substrates.