Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Country of Origin
- Product Code
- MITM04026
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Ink & Toner End Applications
- Markets
- Applications
Properties
- Physical Form
- Note
Drying the coatings at 300°F for 30 minutes simulates final properties of the resin.
- The white lacquers were formulated at a titanium dioxide/binder ratio (solids basis) of 30/70. The properties were determined after coatings were sprayed on Bonderite 1000 to approx. 1.2 dry mils.
- The degree of cracking at the bend over each mandrel is rated on a 0 (no failure) to 10 (complete flaking) scale.
- The degree of flaking at the scribed cross hatch is rated on a 0 (no failure) to 5 (complete lift off) scale.
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Technical Details & Test Data
- Properties in White Lacquers
Tukon Hardness Whiteness (K Color Low Numbers Best)
Cross Hatch³ 30 min. at 180°F 9.3 30 min. at 300°F 8.2 30 min. at 180°F 0 30 min. at 300°F 13.7 16 hrs. at 350°F 8.2 30 min. at 300°F 0 Pencil Hardness Flexibility, "1/8,1/4, 1/2 Mandrels⁴ Mustard Staining (30 min. Exposure) 30 min. at 180°F F 30 min. at 180°F 6,5,4 30 min. at 180°F None 30 min. at 300°F H 30 min. at 300°F 5,5,4 30 min. at 300°F None Gloss, 20° Printing, 2 psi for 1 hr. at 140°F Gasoline Resistance (15 min. Exposure)
30 min. at 180°F 46 30 min. at 180°F Light 30 min. at 180°F Dissolves 30 min. at 300°F 78 30 min. at 300°F Trace 30 min. at 300°F Dissolves Gloss, 60° Knife Adhesion Spray Conditions 30 min. at 180°F 83 30 min. at 180°F Fair Viscosity, #4 Ford Cup, sec. 15 30 min. at 300°F 92 30 min. at 300°F Good Solids Content, % 30.5
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000005
- Principal
Storage & Handling
- Storage Conditions
- Keep combustible and/or flammable products and their vapors away from heat, sparks, flames and other sources of ignition including static discharge.
- Processing or operating at temperatures near or above product flashpoint may pose a fire hazard. Use appropriate grounding and bonding techniques to manage static discharge hazards.
- Failure to maintain proper volume level when using immersion heaters can expose tank and solution to excessive heat resulting in a possible combustion hazard, particularly when plastic tanks are used.
- Store products in tightly closed original containers at temperatures recommended on the product label.
Other
- Color (SDS)
- Clear
- Flammable Nature (SDS)
- May form combustible dust concentrations in air during processing, handling or other means
- Item Number
- Odor (SDS)
- Acrylic odor
- Other Hazards
- If converted to small particles during further handling, processing, or by other means, may form combustible dust concentrations in air, Dust contact with the eyes can lead to mechanical irritation, Contact with dust can cause mechanical irritation or drying of the skin.
- USA/DOT UN Number
- Not Applicable
- Mechanical Properties
Value Units Test Method / Conditions Ultimate Hardness 12.0-13.0 KHN - Physical Properties
Value Units Test Method / Conditions Density 1.09 kg/L At 25°C Glass Transition Temperature (Tg) 50.0 °C Differential Scanning Calorimetry Viscosity 590.0 cPs Brookfield Viscometer at 25°C, 40% solution in xylene - Material Composition
Value Units Test Method / Conditions Solid Content 100.0 %(V/V) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 393.0 °C Liquid Density (SDS) 0.66 g/cm³ Volatile Content (SDS) 2.0 %