Products

DzBh Baling® SBS YH-791H is a linear styrene/butadiene block copolymer.

Dynasylan® PTEO an alkyltrialkoxysilane is important component in sol­gel systems. Dynasylan® PTEO is a colorless, low­viscosity liquid. Dynasylan® PTEO is regarded as trifunctional since all three alkoxy groups can hydrolyze. Additionally Dynasylan® PTEO contains a propyl group that adds a hydrophobic character to the coatings. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

Bermocoll® M 30 Q is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll® M 30 Q contains methyl, ethyl and hydroxyethyl substituents giving a unique balance between workability and strength.

DERTOPOLINE® CG 105 is a dimerised glycerol rosin ester, with low acidity and deodorized.

PARALOID™ AU-2100 is a new acrylic polyol for use in low VOC (<2.1 lb/ gal.) 2K solventborne urethane coatings for the industrial maintenance coatings markets. Standard application viscosities may be achieved without the use of expensive or highly flammable non-VOC solvents. PARALOID Resin AU-2100 can also be formulated as a baking, or stoving, system with melamine or urea resins for those industrial finishes needing either faster property development or slightly different performance needs.

EBECRYL® P116 HP is a photoinitiator used in radiation cure applications. It is compatible with wood substrates.

AEROSIL® R 812 S Coating is a fumed silica after-treated with HMDS.

CARPOL® PGP-3815 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-3815 has a functionality of two and an average molecular weight of 3800 Da. This diol is polymerized with propylene oxide and then capped with 15% ethylene oxide.

EBECRYL® 4491 is an unsaturated aliphatic urethane acrylate recommended in formulations of ultraviolet (UV) and electron beam (EB)curable coatings. The form supplied is 80% in isobornyl methacrylate.

EMERAL EMR D125 is a paste-form chemical mixture used in packaging applications.

PARALOID™ A-11 provides excellent color and color retention, high hardness, and excellent resistance to alcohol and water. It has properties similar to PARALOID™ A-11 Thermoplastic Solution Resins and is used in similar applications. PARALOID™ A-11 Solid Grade Thermoplastic Acrylic Resin is compatible with several other PARALOID™ A-11 resins such as PARALOID™ A-21 Solid Grade Thermoplastic Acrylic Resin, PARALOID™ B-44 Solid Grade Thermoplastic Acrylic Resin, and PARALOID™ B-82 Solid Grade Thermoplastic Acrylic Resin and with other film formers including cellulosic, vinyl, silicone, and epoxy.

AEROSIL® R 812 S is a fumed silica after-treated with HMDS.

D.E.H.® 536 cycloaliphatic amine hardener is used as a curing agent for epoxy resins in applications requiring good color and fast-set.

SURFYNOL® 420 is a multi-functional surfactant that provides dynamic wetting and molecular defoaming properties. It is suitablefor waterborne coatings and inks.

Rilsan® D40 NATURAL are specialty PA powders obtained from renewable ressources. Rilsan® D40 NATURAL show outstanding performances such as anti-corrosion, chemical, impact, abrasion, graffiti resistance.