Products

H.B. Fuller® S-6005 is used as a waterborne adhesive in adhesives and sealants applications.

D.E.H.® 611 is a curing agent used with epoxies (EP) in CASE ingredients.

AIRASE® 4500 is an effective defoamer concentrate based on organic polymer technology. Good balance of effectiveness and compatibility.

Dynasylan® BTSE is the only commercially available bipodal alkylsilane. It is used in numerous applications where its nature as an excellent crosslinking agent is crucial. Its use usually requires acid- or alkali-catalysed hydrolysis. Since all six ethoxy groups are able to participate in this reaction, Dynasylan® BTSE is regarded as hexafunctional. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation starts before hydrolysis is complete. During storage of these hydrolysates, condensation continues until a gel is formed.

EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. EBECRYL® LEO 10553 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

AP 5645 is a low viscosity, modified aliphatic amine hardener for epoxy resins based lacquers coatings.

AP1028 is medium viscosity, reactive, phenalkamine hardener for epoxy resin based lacquers and coatings.

ACEMATT® 810 is an untreated, coarse particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.

Dynasylan® GLYEO is a bifunctional organosilane possessing a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. The dual nature of its reactivity allows Dynasylan® GLYEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYEO is a colorless low­viscosity liquid with a slight terpentine­like odor. It is soluble in alcohols, ketones and aliphatic and aromatic hydrocarbons.

EBECRYL® 889 is an energy curable polyester acrylate for publication inks. EBECRYL® 889 provides good pigment wetting and color development for process color inks. Inks made with EBECRYL® 889 exhibit good adhesion to super- calendared paper, good ink transfer and excellent printability.

DYNOL™ 800 has the ability to reduce both static and dynamic surface tension in waterborne coatings and inks. DYNOL™ 800 is an excellent choice for difficult-to-wet substrates requiring good flow and leveling.

EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory applied, waterborne, interior and exterior wood coatings. Its self crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. If EMULSION E-2353 is too hard, it can be blended with a soft polymer, such as RHOPLEXTM AC-261. It can also be reacted with melamine formaldehyde resins, the combination of which offers an extremely durable finish, ideally suited for long term warranty applications.

DERTOPHENE® T 115 is a light-colored and low VOC terpene phenolic resin. It is compatible with various polymers and suitable for solvent based, hot melt adhesives.

HFGEL 120-X is an organoclay for solvent-based systems of low to medium polarity.

RHOPLEX® PR-33 is an aqueous, all-acrylic, binder designed for exterior and interior primers and stain blocking sealers. This binder uses ambient cross linking technology to offer improved primer performance versus conventional latex polymers. The combination of an all-acrylic backbone and ambient cure crosslinking technology contribute to the excellent balance of properties found with RHOPLEX® PR-33 Emulsion Polymer. The excellent film formation achieved blocks stains from migrating through the dry paint film and yields stain blocking performance at high PVC. Enhanced adhesion and excellent durability are additional attributes of this technology.