Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Oligomer, Monomer
- Product Code
- MITM00464
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
- Inks with lower tack and lower misting
- Inks with higher gloss
- Adhesion to super-calendared paper
- Excellent printability
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives and photoinitiators.
Applications & Uses
- Compatible Substrates & Surfaces
- Ink & Toner End Applications
- Markets
- Applications
Properties
- Physical Form
- Key Properties
EBECRYL 889 55-60 % Acrylated monomer 5-10 % Pigment 25-35 % Ink EBECRYL 889 Pigment dispersion 55-60 % EBECRYL 889 20-25 % Acrylated monomer 2-4 % Inert filler 2-4 % ADDITOL® DX 8-10 % - Typical Tack Ranges
Oligomer / Reactive diluent Tack, g-m Condition EBECRYL 889 10-12 400 RPM, 90°F, 3 minutes; Thwing-Albert Electronic Inkometer
EBECRYL 889/5% OTA-480 8-10 400 RPM, 90°F, 3 minutes; Thwing-Albert Electronic Inkometer,Allnex produces OTA-480 (propoxylated glycerol triacrylate) TMPTA (trimethylolpropane triacrylate) and TPGDA (tripropylene glycol diacrylate) and ADDITOL DX (liquid photoinitiator blend).
EBECRYL 889/5% TMPTA 8-10 400 RPM, 90°F, 3 minutes; Thwing-Albert Electronic Inkometer,Allnex produces OTA-480 (propoxylated glycerol triacrylate) TMPTA (trimethylolpropane triacrylate) and TPGDA (tripropylene glycol diacrylate) and ADDITOL DX (liquid photoinitiator blend).
EBECRYL 889/5% TRPGDA 9-11 400 RPM, 90°F, 3 minutes; Thwing-Albert Electronic Inkometer,Allnex produces OTA-480 (propoxylated glycerol triacrylate) TMPTA (trimethylolpropane triacrylate) and TPGDA (tripropylene glycol diacrylate) and ADDITOL DX (liquid photoinitiator blend).
Safety & Health
- Safety Precautions
Avoid contact with eyes, skin and clothing. Direct contact with this material may cause moderate eye and skin irritation. Repeated or prolonged dermal contact may cause allergic skin reactions. Wash thoroughly after handling. Use with adequate ventilation. Keep container closed.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
The maximum recommended storage temperature for EBECRYL® 889 is 4°C to 40°C (39°F to 104°F). Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Amber
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Acrylate ester
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Protect from Freezing
- Yes
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 10.0 Gardner Gardner Gardner Color Scale - Physical Properties
Value Units Test Method / Conditions Density 1.07 g/mL g/mL At 25°C Storage Temperature 39.2-104.0 °F °F Viscosity 30000.0 cPs cPs At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.1 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Cleveland Open Cup Volatile Content (SDS) max. 0.5 % % - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d