Products

Hostavin® 3212 liq is a 100% liquid blend of an oxalanilide based UV absorber with a low molecular weight HALS.

SS-07 is energy conservation materials, environmental and safety. Non-toxic, no smell and free of heavy metals.

3M™ Ceramic Microspheres W-610 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products, they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

DB™ Oil is the highest grade of refined castor oil. It was developed for use in applications when a low acidity and moisture content are critical.

Hostavin® VSU powder is an Oxalanilide UV absorber, a low volatile polar substance with good heat stability. It is resistant to discoloration with metal ions, e.g. from polymerization catalyst residues, fillers or from contact surfaces. Hostavin® VSU powder absorbs the UV light especially in the UV-B range, and is therefore a stabilizer of choice for combinations with optical brighteners and for UV curing systems.

Hostavin® 3055 liq is a low-molecular radical scavenger of the type hindered amine light stabilizer (HALS) for solventless and solventborne paints. On principle, it is also suitable in waterbome coatings. Hostavin® 3055 liq is characterized by its excellent solubility, broad compatibility, low volatility and good stabilization efficiency. It can either be added to the ready-to-use paint or incorporated during the paint production. However, as all UV stabilizers, it ought not to be added to the mill-base. Depending on the requested stabilization effect, the addition rate should be in the range of 1.0 to 3.0 %. All concentrations relate to active UV stabilizer on solid resin. Pre-trials, covering various concentrations, are highly recommended. As a non-substituted HALS, Hostavin 3055 liquid is slightly basic and because of this can have an influence on the crosslinking of binders. In such a case, the altemative use of Hostavin 3058 liquid is recommended. Since HALS is highly recommended for all outdoor durable coatings, the need for an additional UV absorber strictly depends on the UV transmittance of the final coating. Inorganically pigmented coatings with good hiding power do usually not require an additional UV absorber, clear coats certainly do.

Licowax® PE 130 Powder is a high density polyethylene wax.

EBECRYL® 524 is an acid-modified polyester resin diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). It exhibits very low color and moderate acid value. EBECRYL 524 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion to a variety of substrates including paper, plastics and metal. It is particularly useful in UV/EB laminating adhesives.

Hostanox® P-EPQ powder is a highly efficient phosphorus based secondary antioxidant, which reduces the thermo-oxidative degradation of polymers and the development of undesired color (yellowing) during processing. The main advantages of Hostanox® P-EPQ powder are its high thermal stability and high solubility in polymeric materials as well as its broad compatibility in coating polymers.

3M™ Ceramic Microspheres W-210 is a unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. 3M™ Ceramic Microspheres W-210 is typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of 3M™ Ceramic Microspheres W-210, it is also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

Licowax® PE 520 powder is a polyethylene wax.