Products

EBECRYL® 876 is a polyester acrylate resin designed for use in UV/EB curable coating applications, in particular over-print varnishes (OPVs). EBECRYL 876 provides a bisphenol A (BPA) free alternative to epoxy acrylate based formulations while providing equivalent performance properties such as fast cure response, high gloss, hardness and excellent chemical resistance.

EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. EBECRYL 657 provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, and low misting. It can be blended with epoxy acrylates or EBECRYL 436 or EBECRYL 438 to increase cure speed.

OREVAC® 18341 is a maleic anhydride grafted linear low-density polyethylene.

KRONOS® 2056 a versatile pigment with a warm tone.

EBECRYL® 8213 is an aliphatic urethane acrylate with 70% solid content diluted in butyl acetate. EBECRYL® 8213 exhibits good yellowing resistance and very good outdoor resistance. Furthermore this resin provides very good adhesion onto aluminium-based vacuum metallization layer and most metallic basecoats for plastic coating.

Coscat® 83 is an organobismuth compound that was specifically developed as a catalyst for two component, polyurethane systems. For soft to medium hardness systems the addition of a zinc catalyst can reduce a potential lag in final cure, yielding a stronger final cure typical of a mercury-based catalyst.

EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for applications requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL® 8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, and resistant to yellowing. EBECRYL® 8896 is compatible with variety of fillers, pigments, waxes, and polymeric beads allowing formulator maximum formulating latitude to create a number of haptic properties ranging from a velvety/silky feel to EBECRYL® 8896’s intrinsic rubbery feel.

EBECRYL® 150 is an ethoxylated bisphenol A diacrylate commonly used as reactive diluent in UV/EB cure applications. EBECRYL® 150 can improve the cure response, hardness, and chemical resistance of UV/EB curable coatings and inks while maintaining good adhesion, and without imparting brittleness.

EBECRYL® 210 is an aromatic urethane diacrylate. Films of EBECRYL 210 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, low color and good adhesion to various substrates.

CRAYVALLAC® SLX is a high performance micronised amide wax rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane systems, where processing temperatures typically lie within the range 60 - 90°C. CRAYVALLAC® SLX particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.

TRIGLYCIDYL ISOCYANURATE JF-77C is an isocyanurate-based crystalline polyepoxide compound, its molecular weight is 297 (CAS Number: 2451-62-9), and it owns good heat resistance, weather resistance, adhesive, and high-temperature performance.

EBECRYL® P104 is an acrylated amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL P104 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Recommended levels are from 5 to 15% based on total formulation, usually combined with 3-5% photosensitizer. EBECRYL P104 can be used with EBECRYL P39 (a polymeric benzophenone derivative) for formulations requiring low residual odor.