Products

HIKOTACK® P-90S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. HIKOTACK® P-90S can be used as tackifier for Ethylene Vinyl Acetate (EVA) based hot melt adhesive (HMA), water repellent agent, concrete curing agent and binder for asphalt.

D.E.R.® 354 liquid epoxy resin is a standard liquid epoxy resin based on the reaction products of bisphenol f and epichlorohydrin.

ORGASOL® 2002 D NAT 1 is a spheroïdal powder of polyamide 12, with 20 um as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing excellent consistency in performance.

AEROXIDE® Alu C Silica is a fine-particulate, pure aluminium oxide with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to an organic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

EBECRYL® PEG200DMA (polyethylene glycol di-methacrylate), CAS N° 25852-47-5, is a difunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® PEG200DMA forms homopolymers and copolymers. EBECRYL® PEG200DMA is compatible with a wide range of acrylated- and methacrylated resins.

Dynasylan® VPS 4721 is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows VPS 4721 to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® VPS 4721 is a colorless liquid. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons.

SILCOLEASE™ PC-94 is an emulsion of Dioctyl Tin Dilaurate. This is the catalyst component of a silicone release formulation and promotes polymerization through a polycondensation reaction.

D.E.R.® 3274 epoxy resin is a bisphenol-a based liquid epoxy resin modified with a di-functional reactive diluent, 1,4-butanediol diglycidyl ether.

D.E.R.® 383 liquid epoxy resin is a reaction product of epichlorohydrin and Bisphenol A.

FORTEGRA® 401 is a specialty polyoxypropylene diamine modified liquid epoxy resin. FORTEGRA® 401 is designed for the use of enhancing the toughness and flexibility for epoxy systems, mainly used in epoxy adhesives and coatings products. With improved toughness and flexibility, the adhesives products can achieve better drop resistance and impact peeling resistance, as well as perform well on aging tests. While for the applications in coatings, it brings the benefits of improved adhesion and impact resistance. A wide variety of curing agents are available to cure this resin at ambient conditions. Most frequently used curing agents are aliphatic polyamines, polyamides and modified versions of these. Elevated temperature cure is necessary and post-cure required to develop full end properties if anhydride or catalytic curing agents are employed.

Dynasylan® AMEO-T is a blend of primary and secondary aminofunctional silanes. The blend contains more than 90 wt% of 3­ aminopropyltriethoxysilane. Aminofunctional silanes posses a reactive amino group and a hydrolyzable ethoxysilyl group. The dual nature of this reactivity allows Dynasylan® AMEO­T to bind chemically to both inorganic materials (e.g. glass, metals and fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, a surface modifier and a reactive reagent. Dynasylan® AMEO­T is a yellowish liquid with an amine­like odor. It is soluble in alcohols as well as aliphatic or aromatic hydrocarbons.

D.E.N.® 440 is a high functional epoxy novolac resin.

3M™ Glass Bubbles K20HS are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall density of the composite. These composites can be incorporated into deep sea syntactic foam buoyancy modules to improve uplift properties of the system at minimal foam volumes. The high strength of K20HS glass bubbles can withstand both the high processing shear forces of polymer mixing and the pressure of seawater in many applications. 3M™ Glass Bubbles K20HS have isostatic crush strengths of 750 psi with a minimum of 90% survival.