Products

CARPOL® PGP-4000 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® PGP-4000 may also be included as a component in other urethane products and formulations.

40 Oil - Polymerized Castor Oil at the double bond yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks, and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil, and solvent resistance.

Bermocoll® EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

TMPTA is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance.

CARPOL® EDAP-770 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

Bermocoll® EHM 200 is an associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water based paints.

DzBh Baling® SBS YH-791E is a linear styrene/butadiene.

Coscat® 83 is an organobismuth compound that was specifically developed as a catalyst for two component, polyurethane systems. For soft to medium hardness systems the addition of a zinc catalyst can reduce a potential lag in final cure, yielding a stronger final cure typical of a mercury-based catalyst.

CARPOL® GP-700 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E. and flexible foam, however, CARPOL® GP-700 may also be included as a component in other urethane products and formulations.

Superior Graphite 5003924 is a carbon-based graphite compound used in oilfield applications.

VANCRYL® 68 is a solid acrylic resin that provides outstanding pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. The transfer properties and hold-out characteristics of inks prepared with VANCRYL 68 are excellent. In coatings, VANCRYL® 68 provides high gloss, scuff resistance, and hardness. VANCRYL 68 is compatible with most acrylic vehicles and other vehicles such as maleic resins. VANCRYL® 68 is effective as a protective colloid in the production of styrene-acrylic copolymer emulsions.

DzBh Baling® SIS YH-1125 is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 25%.

CYCAT® 4045 CATALYST is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT® 4045 CATALYST It is especially recommended for use with highly alkylated amino crosslinking resins. It provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH.

ZHENGDA® ZM-1207 is a monoamine based on a copolymer backbone. ZHENGDA® ZM-1207 polyetheramine is a monofunctional, primary amine with an average molecular weight of about 2,000. The propylene oxide/ethylene oxide (PO/EO) mol ratio is 10/31.

Wayncor™ 222 is a white, non-refractive, anti-corrosive pigment used in protective coatings. It is widely considered by the coatings industry to be a standard corrosion inhibitor. It exhibits a high degree of versatility and is compatible with almost all commercially available aqueous and solvent based coatings. The use level will vary depending upon resin system, pigment volume concentration and desired performance parameters, however typical use levels are between 3 - 10% total formula weight.