Products

ADDID® 900 is an adhesion promoter for solvent-borne and waterborne primers and coating formulations. It is based on an amino-functional silane.

3M™ Glass Bubbles K20 are specially formulated to provide a high strength-to-weight ratio. This enhances survivability under demanding processing conditions, such as injection molding. These glass bubbles create stable voids, leading to low thermal conductivity and a low dielectric constant.

CARBOWET® GA-100 is a non-ionic grind aid for waterborne formulations. Focus on pigment wetting. Additionally helps deaeration of the millbase.

SPHERILEX® AC 45 (formerly EXP 9111-1) is a spherical precipitated calcium silicate designed to improve corrosion resistance when added to a coating formulation. It has a typical calcium content (CaO%) of between 6.5-7.5% and a relatively low oil absorption. Due to its unique morphology, it may also enhance film hardness and improve abrasion resistance of the cured coating.

TEGO® DISPers 740 W is a non-ionic wetting and dispersing additive for waterborne dispersions. Provides high color strength with organic pigments. Can be used as co-additive in base paints to improve the color acceptance.

D.E.H.® 800 is a polyamine-adduct based epoxy curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol.

CRAYVALLAC® LA-150 is a new pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to solvent based systems.CRAYVALLAC® LA-150 is a post-addition rheology modifier composed of a modified urea dissolved in DMSO. When added to the final system, the DMSO is diluted and the modified urea crystallizes out as very fine fibres which build into a three-dimensional interacting network. It is this network that gives rise to the system’s shear thinning rheology and time dependent viscosity recovery. The result is excellent control of sedimentation combined with ease of application. Immediately following application, where low shear conditions again predominate, the system’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependency is known as thixotropy and enables the final system to attain very good levelling.

Polyfill 301SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

ACRYSOL™ RM-2020 is a non-ionic urethane rheology modifier, providing high shear viscosity. It is specifically designed for applications where a low odour or low VOC is required. It can be used either alone or in combination with thickeners effective in the low shear range to reach the desired rheological profile. ACRYSOL™ RM-2020 Rheology Modifier allows formulations with a Newtonian rheology profile combined with excellent water and alkali resistance.

TAMOL® 731A is a dispersant and scale inhibitor used in industrial applications. It is designed for use in boiler feed water and recirculating cooling water systems.

ACRYSOL™ TT-615 is an alkali swellable acrylic polymer emulsion used as either a primary or ancillary thickener in coatings. This product exhibits viscosity build comparable to high molecular weight HEC thickeners at low shear levels. Viscosity is developed by neutralization to a pH of 7 to 10. ACRYSOL™ TT-615 demonstrates greater roller spatter resistance than the cellulostics, but with a more pseudoplastic rheology profile. The liquid physical form of ACRYSOL™ TT-615 facilitates its incorporation into grinds and letdowns.

FlexTalc® 610 is an ultrafine talc product line specifically engineered for use in high performance TPO applications. It is made by a proprietary process that results in talc products which have very high aspect ratios, are easily dispersed, provide unmatched heat aging and offer exceptional compounded color. It is avalable in powder and compacted (D) forms, lightly compacted (LD) and sized/compacted (DS)

CRAYVALLAC® PA4 X 20 is a rheology modifier pre-activated amide wax supplied in a mixture of xylene and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 X 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

ACRYSOL™ RM-1020 is a thickener from the chemical mixtures and blends family.

Sterotex® P is a spray-chilled powder produced from fractionated, non-hydrogenated, refined palm oil.