Products

AEROSIL® R 805 Silicas is a fumed silica after-treated with organosilane. It provides utmost transparency.

3M™ Boron Nitride Cooling Filler Platelets 001 is engineered to improve thermal conductivity in polymers while maintaining or improving electrical insulation. Their unique properties make these additives suitable for many thermoplastic, elastomer and thermoset resins used in a wide variety of electrical and electronic applications – including thermal interface materials (TIM), consumer electronics and automotive applications.

3M™ Glass Bubbles S28HS are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall thermal conductivity of the composite. These composites can be coated or incorporated into deep sea oil pipelines to improve the flow assurance properties of the system.

3M™ Boron Nitride Cooling Filler Flakes 500-15 is a engineered to improve thermal conductivity in polymers while maintaining or improving electrical insulation. Their unique properties make these additives suitable for many thermoplastic, elastomer and thermoset resins used in a wide variety of electrical and electronic applications including thermal interface materials (TIM), consumer electronics and automotive applications.

AEROSIL® R 208 Coating is a fumed silica after-treated with polydimethylsiloxane.

SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates. SIPERNAT® FPS-5 is an extremely finely ground silica.

SIPERNAT® 820 A represents a specific product range of precipitated silica, aluminium and calcium silicates. SIPERNAT® 820 A is a sodium aluminum silicate with a high level of whiteness and reduced coarse particles.

AEROSIL® R 812 S Coating is a fumed silica after-treated with HMDS.

3M™ Glass Bubbles S32HS are high-strength, low-density additives specially formulated to afford greater survivability than other lightweight additives under demanding processing conditions. They are hollow glass microspheres made from water-resistant and chemically-stable soda-lime borosilicate glass. These hollow glass microspheres can be used as a low-density filler material for many applications. 3M glass bubbles help to reduce weight, reduce noise, vibration and harmonics; reduce thermal expansion and contribute to cost savings. They are used in a variety of applications in diverse markets, including automotive, construction materials, electronics, marine and paints and coatings.

AEROSIL®E 9200 is a structure modified, hydrophobic fumed silica. It enables high loading levels at low viscosities. It is very easy to disperse.

3M™ Glass Bubbles S38 is specially formulated for a high strength-to-weight ratio. This allows greater survivability under many demanding processing conditions, such as injection molding. They also produce stable voids, which results in low thermal conductivity and a low dielectric constant. 3M glass bubbles are available in a variety of sizes and grades to help you meet your product and processing requirements.

CIMTUFF® 9103 D is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTUFF® 9103 D is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTUFF® 9103 D is are platy, hydrophobic, non-abrasive and chemically inert.

3M™ Boron Nitride Cooling Filler Platelets 012 P is a powders of highly crystalline boron nitride single platelets. Particle mean size ranges from 0.5 to 14 μm.

3M™ Glass Bubbles S38HS are high-strength polymer additives made from a water-resistant and chemically-stable soda-lime-borosilicate glass. These glass bubbles are designed for buoyancy and insulation in ultra-deep water applications in oil and gas drilling.The bubbles produce strong, stable voids and low thermal conductivity, helping coatings achieve the necessary compressive strength.

3M™ Glass Bubbles S60HS are engineered hollow glass microspheres that are alternatives to conventional fillers and additives such as silicas, calcium carbonate, talc, clay, etc., for many demanding applications. These low density particles are used in a wide range of industries to reduce part weight, lower costs and enhance product properties. The unique spherical shape of 3M glass bubbles offers a number of important benefits, including: higher filler loading, lower viscosity/improved flow and reduced shrinkage and warpage. It also helps the 3M glass bubbles blend readily into compounds and makes them adaptable to a variety of production processes including spraying, casting and molding. The chemically stable soda-lime-borosilicate glass composition of 3M glass bubbles provides excellent water resistance to create more stable emulsions. They are also non-combustible and non- porous, so they do not absorb resin. And, their low alkalinity gives 3M glass bubbles compatibility with most resins, stable viscosity and long shelf life.