Products

Exolit® OP 930 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents lik cetone, dichloromethane, MEK, toluene. Exolit® OP 930 can easily be dispersed in solvents like acetone or MEK.

Bluesil™ FLD 47 V500 is straight chained polydimethylsiloxanic fluids.

Ceridust® 9615 A is a micronized wax compound, based on polyethylene wax and amide wax.

SPHERILEX® AC 45 HS (formerly EXP 9111-2) is a spherical precipitated calcium silicate designed to improve corrosion resistance when added toa coating formulation. It has a typical calcium content (CaO%) of between 6.5-7.5%and a higher oil absorption than SPHERILEX® AC 45. Due to its unique morphology, it may also enhance film hardness and improve abrasion resistance of the cured coating.

K-FLEX® 500 is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate in a ratio of about one to one by weight. K-FLEX® 500 was created to take advantage of the excellent performance of diethylene glycol dibenzoate but with the added advantage of the better handling characteristics imparted by dipropylene glycol dibenzoate. Like K-FLEX DP, K-K-FLEX® 500 is a polar plasticizer that is a high solvator for PVC applications. K-FLEX® 500 is also compatible with polar polymers such as polyvinyl acetate.

K-FLEX® 850P is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate specifically designed for vinyl applications with economy as a focus. It is similar in composition to K-FLEX® 850P (diethylene glycol dibenzoate rich). By composition it is a non- phthalate. As a high solvator for vinyl it can be formulated alone or in blends for plastisols as well as melt compounded vinyl.

Superior Graphite 2924 is a purified flake product manufactured using Superior Graphite’s proprietary electro-thermal purification technology. This continuous high-temperature process exposes the flake graphite to extremely high temperatures so that impurities, including inorganic contaminants, are sublimed. Superior Graphite 2924 is medium-fine size grade of the ‘Thermally Purified Flake’ product line produced using Superior Graphite’s dedicated milling and screening technology. Main uses are increase in thermal and electrical conductivity, coefficient of Friction reduction, wear reduction in high demanding applications.

Citroflex™ A-4 is a low molecular weight citric acid ester partially derived from bio-based raw materials.

D.E.H.® 615 is a low viscosity, solvent-free, Mannich base curing agent for epoxy resins. It contains no benzyl alcohol.

AP 1054 LV is a low viscosity and highly reactive Phenalkamine hardener for epoxy resins based lacquers and coatings. It has excellent rapid cure properties, even at low temperatures offers very good chemical resistance, and provides excellent adhesion on wet, unprepared surfaces and concrete.

K-FLEX® 975P is a blend of diethylene glycol dibenzoate, dipropylene glycol dibenzoate and propylene glycol dibenzoate. K-FLEX® 975P was created to offer a broad range of compatibility with polar polymers

ROYALE BLACK® PC505 has been developed for semi-conductive applications. It is easy processing and ultra clean conductive black designed for use in a semi conductive compound for medium voltage power transmission cable application. With high structure, it offers higher conductivity and good processability in semi-conductive compounds.

Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access.