Products

Ceridust® 3030 TP is a micronized additive made from metallocene based high density polyethylene wax.Ceridust® 3030 TP is suitable for all kinds of printing inks and is especially recommended for pasty or solvent based systems. It creates excellent rub resistance and slip effect while keeping a high gloss level. The narrow and fine particles can furthermore prevent pilling on rubber blankets. It is furthermore an excellent additive for liquid coatings and especially recommended for solvent based systems or UV curing formulations. Used in liquid coatings like e.g. for packaging applications, Ceridust® 3030 TP creates excellent scratch resistance, slip effect and protection of the finished good.

AEROSIL® 200 V is a densified hydrophilic fumed silica with a specific surface area of 200 m²/g.

D.E.H.® 52 Epoxy Curing Agent is a viscous aliphatic polyamine epoxy adduct curing agent. D.E.H.® 52 Epoxy Curing Agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and mixing rates with liquid epoxy resins, However D.E.H.® 52 Curing Agent is much less hygroscopic than standard polyamines. D.E.H.® 52 Epoxy Curing Agent is extremely reactive with liquid epoxy resins at room temperature and is used in the maintenance paints, in two-pack adhesives, civil engineering, castings and hand lay-up laminates. D.E.H.® 52 Curing Agent is particularly suitable for colorless coatings or adhesive systems.

Ceridust® 8020 TP is a highly modified copolymer wax.

Foral® AX resin is a thermoplastic, acidic resin produced by hydrogenating gum rosin to an exceptionally high degree. Foral® AX has a very light initial color and its strong resistance to oxidation results in excellent color retention in a wide range of applications. It is used as a tackifier and resin modifier in solvent adhesives and hot melt applied coatings and adhesives that must excel in these properties.

EBECRYL® P39 is a polymeric benzophenone derivative that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. Recommended levels are from 8 to 10% based on total formulation. EBECRYL® P39 should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100, or with amine modified acrylate resins. EBECRYL® P39 is a polymer preparation manufactured in the European Union with (pre)registered monomers/reactants and REACH compliant.

Hostavin® VSU powder is an Oxalanilide UV absorber, a low volatile polar substance with good heat stability. It is resistant to discoloration with metal ions, e.g. from polymerization catalyst residues, fillers or from contact surfaces. Hostavin® VSU powder absorbs the UV light especially in the UV-B range, and is therefore a stabilizer of choice for combinations with optical brighteners and for UV curing systems.

Dynasylan® AMEO-T is a blend of primary and secondary aminofunctional silanes. The blend contains more than 90 wt% of 3­ aminopropyltriethoxysilane. Aminofunctional silanes posses a reactive amino group and a hydrolyzable ethoxysilyl group. The dual nature of this reactivity allows Dynasylan® AMEO­T to bind chemically to both inorganic materials (e.g. glass, metals and fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, a surface modifier and a reactive reagent. Dynasylan® AMEO­T is a yellowish liquid with an amine­like odor. It is soluble in alcohols as well as aliphatic or aromatic hydrocarbons.

Exolit® OP 1230 is a white, fine grained powder based on an organic phosphinate. The product is non-hygroscopic and it is insoluble in water and organic solvents. Exolit® OP flame retardants for polyamides are all based on aluminum diethyl-phosphinate (= DEPAL). The pure substance DEPAL is sold as Exolit OP 1230 and in combination with synergists as Exolit® OP 13xx types. Exolit® OP 1230 is the first non-halogenated flame retardant which can withstand the demanding requirements of this high end segment of engineering plastics.

D.E.H.® 487 Epoxy Curing Agent is a low viscosity, modified cycloaliphatic polyamine based, curing agent for epoxy resins. Epoxy resin systems cured with D.E.H.® 487 Epoxy Curing Agent at temperatures above 10 °C show good early water resistance, making them an excellent choice for marine and floor applications, including epoxy primers and highly-filled, self-leveling floor coatings.

Ceridust® 2740 TP is a high-performance micronized modified amide wax specially designed for wood and powder coatings. It delivers excellent matting, clarity, and scratch resistance while enhancing slip properties for a smooth, durable finish. Ideal for both solvent and water-based liquid coatings, Ceridust® 2740 TP also acts as an effective degassing agent, improving extrusion output and flowability in powder coating applications. This versatile additive ensures superior surface quality and coating performance, making it a valuable choice for advanced coating formulations.

SIPERNAT® 820 A represents a specific product range of precipitated silica, aluminium and calcium silicates. SIPERNAT® 820 A is a sodium aluminum silicate with a high level of whiteness and reduced coarse particles.

YOLIAN YL-68 is a matting hardner M68 is a composed salt of cyclic-amidine and multi-acid. When the double curing group in the molecular structure is cross-linked with the epoxy resin, the different curing rates generate uneven shrinkage, thus forming a flat and dense matte coating film.

AEROSIL® R 812 S Coating is a fumed silica after-treated with HMDS.

AP 5205 is a modified cyclo-aliphatic amine curing agent for epoxy resin based lacquers and coatings.