Products

CRAYVALLAC® PA3 BA 20 is a HAPs-free pre-activated amide wax supplied in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity).CRAYVALLAC® PA3 BA 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates. SIPERNAT® 880 is a calcium silicate which is used as a flow and anticaking agent in many applications.

CRAYVALLAC® SUPER is a high performance, micronised amide wax rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. CRAYVALLAC® SUPER overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body. Consequently, coatings formulated using CRAYVALLAC® SUPER exhibit an enhanced performance such as controlled flow behavior, ease of application and excellent sag resistanceIts smooth viscosity recovery will help to achieve high film thickness without compromising a good levelling.

CRAYVALLAC® PA4 BA 20 is a HAPs-free rheology modifier pre-activated amide wax supplied in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 BA 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

AEROSIL® R 812 Coating is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia.

HFGEL 120-A is an organophilic clay designed for use in low to medium polarity solvent based systems. HFGEL 120-A imparts excellent sag resistance, pigment anti-settling and viscosity control.

AEROSIL® 150 is a hydrophilic fumed silica with a specific surface area of 150 m²/g

SPHERILEX® AC 45 HS (formerly EXP 9111-2) is a spherical precipitated calcium silicate designed to improve corrosion resistance when added toa coating formulation. It has a typical calcium content (CaO%) of between 6.5-7.5%and a higher oil absorption than SPHERILEX® AC 45. Due to its unique morphology, it may also enhance film hardness and improve abrasion resistance of the cured coating.

AddWorks® IBC 760 is a mixture of a UV absorber, hindered amine light stabilizer (HALS) and antioxidant without any hazard labeling and designed to provide outstanding performance in SMP sealants in terms of light and heat stabilization. Available in micronized powder form, AddWorks® IBC 760 prolongs the service life of SMP sealants as it reduces cracking and yellowing that typically occurs if exposed to strong sunlight or high temperature conditions. The performance is evident when tested against current benzotriazole containing solutions in the market. Our new stabilizer solution is an ideal ingredient to formulate high performance SMP sealants used for construction, automotive and other outdoor applications.

Bermocoll® EBS 451 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

BS-1C-A13 is a self-activating organophilic phyllosilicate suitable for use in a broad range of coatings systems including epoxies and unsaturated polyesters. BS-1C-A13 imparts excellent sag resistance, pigment anti-settling and viscosity control properties.

Hostanox® P-EPQ powder is a highly efficient phosphorus based secondary antioxidant, which reduces the thermo-oxidative degradation of polymers and the development of undesired color (yellowing) during processing. The main advantages of Hostanox® P-EPQ powder are its high thermal stability and high solubility in polymeric materials as well as its broad compatibility in coating polymers.

Licowax® PE 130 granules is a high density polyethylene wax.

Hostavin® N 30 powder is an antioxidant, charge control agent, and light stabilizer used in fibers and film applications within plastics and elastomers.

CRAYVALLAC® OPTIMA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications recommended for its ease of activation and smooth viscosity recovery (good levelling). CRAYVALLAC® OPTIMA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body without the need of increasing the temperature of activation. Its smooth viscosity recovery will help to achieve high film thickness without compromising a good levelling.