Products

Polycin® 1679-M3 is a 100% solids, castor oil-based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® 1679-M3 imparts medium hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and levelling.

ALCOTEX 975 is a chemical blend, including methanol and 2-butanol. It is a single-ingredient product primarily used as a crosslinking agent in various CASE (Coatings, Adhesives, Sealants, and Elastomers) applications.

EBECRYL® PEG200DMA (polyethylene glycol di-methacrylate), CAS N° 25852-47-5, is a difunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® PEG200DMA forms homopolymers and copolymers. EBECRYL® PEG200DMA is compatible with a wide range of acrylated and methacrylated resins.

CYMEL® U-227-8 Resin is a general-purpose n-butylated urea resin that combines fast curing speed with excellent enamel stability in pigmented systems. It is compatible with low and medium molecular weight epoxy resins and is recommended for use in epoxy/urea metal primers, metal decorating, and drum and dipping enamels. CYMEL® U-227-8 Resin is also recommended as a pigment grinding vehicle. It is supplied in a mixture of n-butanol and xylene.

EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate that exhibits outstanding flow and leveling and pigment wetting properties. Films of EBECRYL® 3702 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, improved water resistance and good chemical resistance.

CARPOL® PGP-400 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-400 has a nominal functionality of two and a molecular weight of 400 Da. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to lower the viscosity of B-side materials while helping control crosslinking.

CYMEL® U-216-10LF resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the HAPS-free version of CYMEL®® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primers. CYMEL® U-216-10LF resin may also be added as a leveling agent in cold-cure amine catalyzed epoxy resin systems. Approximately 3% of CYMEL® U-216-10LF on a solids basis imparts improved flow properties.

EBECRYL® 3411 is a fatty acid modified bisphenol A epoxy diacrylate resin with relatively low viscosity, good flow and leveling, and excellent pigment wetting properties. Films of EBECRYL® 3411 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, a degree of toughness and good chemical resistance.

CYMEL® 370 Resin is a partially methylated melamine crosslinker supplied in iso butanol. Like other high imino resins, CYMEL® 370 Resin is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 370 Resin suitable for a wide range of solventborne and waterborne industrial bake formulations.

EBECRYL® 1871 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® 1871 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. EBECRYL® 1871 has been specifically developed to formulate low migration UV/EB curable inks for indirect food contact applications.

CYMEL® 1141 Resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. CYMEL® 1141 Resin is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. CYMEL® 1141 Resin contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc. For that reason it is recommended to use CYMEL® 1141 Resin only in dark single coat applications or primers and not in pastel colors.

PACE® 381 is a vinyl acetate homopolymer made in a polyvinyl alcohol colloidal system

Polycin® D-265 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane coating systems. Polycin® D-265, with its very low viscosity, will allow for the formulation of higher system solids with improved VOC reduction. Polycin® D-265 will also impart the beneficial properties of castor oil derivatives, such as improved flow and leveling.

EBECRYL® 3703 is an amine modified bisphenol A epoxy diacrylate that exhibits exceptionally fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 3703 cured by UV or electron beam (EB) demonstrate good flexibility, high gloss and excellent chemical resistance. The amine modification can also improve adhesion to plastics.

WANNATE® HT-90B is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 10% n-butyl acetate, colorless to slightly yellowish clear liquid.