Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Oligomer, Monomer
- Product Code
- MITM13788
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL®® 1871 is characterized by:
- Very good lithographic behavior
- Good pigment wetting
UV/EB cured products based on EBECRYL®® 1871 are characterized by the following performance properties:
- Fast curing
- Good solvent resistance
- High gloss
- Low migration
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives and photo initiators.
Applications & Uses
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
EBECRYL®® 1871 is recommended for use in:
- Lithographic and flexographic inks
- Offset OPV
Inks and coatings for indirect food packaging and related applications
Properties
- Physical Form
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container.
- Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear dark liquid
- Appearance (SDS)
- Liquid resin ester-like
- Color (SDS)
- Clear colorless to pale yellow
- IATA/ICAO Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IATA/ICAO Technical name (N.O.S.)
- Acrylated resin
- IATA/ICAO UN Number
- UN3082
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IMO/IMDG Technical name (N.O.S.)
- Acrylated resin
- IMO/IMDG UN Number
- UN3082
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Protect from Freezing
- Yes
- TDG Canada Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- TDG Canada Technical name (N.O.S.)
- Acrylated resin
- TDG Canada UN Number
- UN3082
- Temperature Control
- Yes
- USA/DOT Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- USA/DOT Technical name (N.O.S.)
- Acrylated resin
- USA/DOT UN Number
- UN3082
- Chemical Properties
Value Units Test Method / Conditions Acid Value max. 15.0 mg KOH/g mg KOH/g - Material Composition
Value Units Test Method / Conditions Residual Solvent Content max. 50.0 ppm ppm - Physical Properties
Value Units Test Method / Conditions Density 1.08 g/cm³ g/cm³ At 20°C Storage Temperature 39.2-104.0 °F °F Viscosity 44000.0-54000.0 - At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.08 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Vapor Pressure (SDS) max. 1.33 - at 20°C Volatile Content (SDS) max. 0.05 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 -