Products

AEROSIL® R 974 Coating is a hydrophobicfumed silica after-treated with DDS (dimethyldichlorosilane).

Polyfill 407SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

Bluesil™ MH25 A2 is straight chained polymethylhydrogensiloxane fluids.

CA/ZN-STEARATE 5050 is a low bulk density, fine white powder.

Stabaxol® I is an active antihydrolysis agent for polyester polyurethanes produced by hot casting as well as for adhesives based on polyester polyurethane.

Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colorless, nearly odorless low ­viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE).

Foral® 105 resin is the pentaerythritol ester of highly hydrogenated gum rosin. A pale thermoplastic resin, it offers advantages as a tackifier or modifier in various adhesive and coating compositions. Foral® 105 resin exhibits outstanding resistance to oxidation and to discoloration caused by heat and ageing. It has a substantially higher softening point than glycerol rosin esters, and is therefore recommended where a harder resin may be desirable.

XIBOND® 245 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

ZINC OXIDE GRADE 500 is a brilliant white powder manufactured by the French (Indirect) Process. Grade 500 is a popular general use high quality lower lead (Pb) zinc oxide. Grade 500 meets GMP 21CFR110, is USFDA approved as GRAS (Generally Recognized As Safe) at 21cfr182.8991 and is authorized by the USFDA for use wherever GRAS is approved including food contact in rubber, plastics, and coatings. ZINC OXIDE GRADE 500 is also meets the requirements of ASTM specification D79, 2000/53/EC End of Life Vehicles (ELV Directive), 2002/95/EC Restriction of Hazardous Substances Directive (RoHS) for heavy metals and Waste Electrical and Electronic Directive (WEEE), and other regulations where high quality zinc oxide is required. The product is also available in pelleted form (grade 500P), and with around up to 0.1% processing aid/surface treatment (grade 500T) for some rubber mixers.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

ZINC STEARATE TX PASTILLES are a low bulk density, very fine white powder.

Europrene® SOL TH 2312 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where bound styrene content is 30%wt. A non-staining, TNPP free antioxidant system is added during the production process.

Solumer™ 8705 is an ethylene-octene copolymer produced via Nexlene™ technology. It performs well in a wide range of general purpose thermoplastic elastomer applications and has excellent flow characteristics.