Products

Focus Nilfoam 926 is a highly effective organo silicone based foam control additive. It is fully dispersible in water and is designed to be used in water-based systems such as metalworking coolants, waterborne coatings, inks and adhesives. Focus Nilfoam 926 provides rapid defoaming and has good compatibility with many different aqueous- based systems.

PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB based synthetic lubricants, as well as the formulations containing these components, where conventional polyacrylate based defoamers do not work or do not work well.

HFGEL 120-OG is is easy to disperse and suitable for lubricating greases based on recovered oil,mineral oil with low kinematic viscosity, partial synthetic oils and other organic fluids.

MARLOX® RT 64 is one of the many low-foaming EO/PO non-ionic surfactants produced by Sasol Chemicals in Germany. These alcohol alkoxylates are based on Sasol’s wide range of linear and semi-linear fatty alcohols. They are produced by alkoxylation of the fatty alcohols to varying degrees using ethylene oxide and propylene oxide. MARLOX RT 64 is a turbid liquid at room temperature and essentially 100% active.

NYONOL™ LP-625 is a water insoluble polyalkene glycol (PAG). It is a clear liquid at room temperature with a low vapor pressure. NYONOL™ LP-625 exhibits excellent lubricity and can be used in various industrial lubricating applications.

Focus ChloroPar W-40 is a chlorinated compound based on C21-34 alkanes. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Silcolapse® 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. Silcolapse® 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them.

Focus ChloroPar W-40AO is a chlorinated very long chain alkane (C24-28). This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Superior Graphite 5590 is a purified synthetic graphite manufactured using Superior Graphite’s proprietary electro-thermal purification technology. This continuous high-temperature process exposes the raw materials to extremely high temperatures, so that impurities including inorganic contaminants are evaporated. Superior Graphite 5590 is an ultrafine grade within this product line produced using Superior Graphite’s dedicated milling and screening technology. Main uses are wear reduction and increase in thermal conductivity for high demanding applications.

Focus ChloroPar P-45 is a chlorinated paraffin based on a medium-chain (C14-16) paraffin. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

PC-2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC-2544™ Defoamer is also suggested for evaluation in specialty applications where efficient high temperature performance is required. Typical use levels of the defoamer solutions range from 50 - 500 ppm (20 - 200 ppm active polymer). The optimum level is dependent upon the nature of the oil, and it is therefore necessary to run a concentration profile on each oil.

Focus DISPerse P-1000 is a polyisobutylene succinic anhydride (PIBSA), produced from 950 molecular weight polyisobutylene. They are produced via the thermal process, have no residual chlorine, and are soluble in both paraffinic and naphthenic oils.

PC-1244™ Defoamer is a solution of organic polymer in a petroleum solvent. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1244™ Defoamercontains no silicone. PC-1244™ Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine and transmission oils. Typical use levels range from 20 ppm to 2000 ppm (0.2 %) on active solids.

MARLOWET® LVS is castor oil ethoxylated dioleate