Products

GRANOLITE® P is a pentaerythritol ester of rosin, is a light-colored and deodorized resin suitable in various adhesive and road marking Hot Melt formulations.

CA/ZN-STEARATE 5050 is a low bulk density, fine white powder.

Foral® 105 resin is the pentaerythritol ester of highly hydrogenated gum rosin. A pale thermoplastic resin, it offers advantages as a tackifier or modifier in various adhesive and coating compositions. Foral® 105 resin exhibits outstanding resistance to oxidation and to discoloration caused by heat and ageing. It has a substantially higher softening point than glycerol rosin esters, and is therefore recommended where a harder resin may be desirable.

D.E.R.® 916 Epoxy Resin is a modified, semi-solid, epoxy novolac resin emulsified in water.

D.E.H.® 802 is a polyamine adduct waterborne curing agent with optimized rheology specially designed to provide superior performance in roller applications. It can be used with liquid Bisphenol A and/or Bisphenol F epoxy resins. It is supplied at 50 % solids in water.

Europrene® SOL TH 2312 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where bound styrene content is 30%wt. A non-staining, TNPP free antioxidant system is added during the production process.

D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. Benefits D.E.H. 804 serves as a curing agent for self-leveling floorings. When cured with D.E.R. 3221 above a D.E.H. 805 based primer, D.E.H.® 804 did not contribute to significant emissions, such that the full flooring system could pass the AgBB evaluation scheme and get labeled A+ according to the French labeling of construction products evaluation scheme. D.E.H.® 804 is also suitable for the development of flooring on green concrete or where water is expected to migrate from the substrate.

D.E.H.® 488L is a modified cycloaliphatic polyamine curing agent with long pot life. No phenol or nonylphenol were used in the manufacture of this material. It has high reactivity, low viscosity and good acid and chemical resistance. Epoxy resin systems cured with D.E.H.® 488L at temperatures above 10 C show an outstanding early water resistance.

3M™ Glass Bubbles S32HS are high-strength, low-density additives specially formulated to afford greater survivability than other lightweight additives under demanding processing conditions. They are hollow glass microspheres made from water-resistant and chemically-stable soda-lime borosilicate glass. These hollow glass microspheres can be used as a low-density filler material for many applications. 3M glass bubbles help to reduce weight; reduce noise, vibration and harmonics; reduce thermal expansion; and contribute to cost savings. They are used in a variety of applications in diverse markets, including automotive, construction materials, electronics, marine and paints and coatings.

D.E.R.® 721 is an aliphatic liquid epoxy resin based on a reaction product of epichlorohydrin and C12-C14 alcohol.

AP 5608 is a low viscosity modified Cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. The coating made from AP 5608 has very high gloss.

D.E.R.® 570 is a low viscosity modified cycloaliphatic amine hardener. D.E.R.® 570 imparts high strength and excellent chemical resistance.

COPRO® SP-480 is a styrene acrylic copolymer emulsion.

NGT 209 surfactant is borne from ecofriendly economical natural non-edible oil feed stream. It is modified with ethoxylation with different mole(s), acts as emulsifier, demulsifier, dispersing agent, wetting agent, detergency as per the end application use.

FH-988L is a modified bentonite for water-based systems.