Products

XIBOND® 370 is a reactive additive to improve the blend morphology of polymer blends; this additive is a random terpolymer of styrene, maleic anhydride and N-Phenylmaleimide.

3M™ Boron Nitride Cooling Filler Flakes 200-3 is a engineered to improve thermal conductivity in polymers while maintaining or improving electrical insulation. Their unique properties make these additives suitable for many thermoplastic, elastomer and thermoset resins used in a wide variety of electrical and electronic applications – including thermal interface materials (TIM), consumer electronics and automotive applications.

LOTADER® 3410 is a random ethylene-butyl acrylate-maleic anhydride terpolymer. LOTADER® 3410 is a versatile adhesive for extrusion coating or lamination, designed as: Concentrate to be used in dry blend with LDPE. LOTADER® 3410 improves adhesion of LDPE on aluminium foils, metallized or primerized films. Ready for use resin to be used pure. LOTADER® 3410 gives excellent adhesion on substrates likes aluminium foil, metallized plastics, paper, board, PE and some plastic films like BOPP. Coextrusion tie layer for PE/PA in extrusion coating process. LOTADER® 3410 can also be used as a coupling agent for mineral filled compounds such as halogen free flame retardant wires and cables, a compatibiliser for polyamide/polyolefin blends and a modifier for polyamides.

WANNATE® HT-790B is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 10% n-butyl acetate, colorless to slightly yellowish clear liquid.

APODIL 1023 is a dimer acid based diglycidyl ester. The product is used as reactive diluent for high viscosity epoxy resins, which imparts flexibility, impact resistance and toughness.

Clearstrength® XT100 is a toughness modifier and toughener used in acrylics, epoxies (EP), and polyesters. It offers easier processing, good dispersibility, excellent toughness, and is highly versatile with low viscosity.

Foral® 85 resin is a glycerol ester of hydrogentated gum rosin. It is an exceptionally pale, thermoplastic resin that has outstanding resistance to oxidation and to discoloration caused by heat and ageing. It can be used in a wide array of adhesive tackifier applications and in protective/barrier type coatings where light color and oxidation resistance are needed.

Licolub® PED 1602 is an oxidized high-density polyethylene with high acid number

3M™ Glass Bubbles A20/1000 is engineered hollow glass microspheres that are alternatives to conventional fillers and additives such as silicas, calcium carbonate, talc, clay, etc., for many demanding applications. These low density particles are used in a wide range of industries to reduce part weight, lower costs and enhance product properties. The spherical shape of 3M™ Glass Bubbles A20/1000 offers a number of important benefits, including: higher filler loading, lower viscosity/improved flow, and reduced shrinkage and warpage. It also helps the 3M™ Glass Bubbles A20/10000 blend readily into compounds, and makes them adaptable to a variety of production processes, including spraying, casting and molding. In addition, they offer greater survivability under demanding processing conditions, such as injection molding, and also produce stable voids, which results in low thermal conductivity and a low dielectric constant. The chemically stable soda-lime-borosilicate glass composition of 3M™ Glass Bubbles A20/1000 provides excellent water resistance, to create more stable emulsions. They are also non-combustible and non-porous, so they do not absorb resin. And, their low alkalinity gives 3M™ Glass Bubbles A20/1000 compatibility with most resins, stable viscosity and long shelf life.

Energia® 360 is a conductive carbon black which is designed to deliver excellent conductivity in various thermoplastics such as PP, HIPS, PE, PS, PA and other rubber applications. The morphological properties of Energia 360 are balance such a way that it offers excellent conductivity and good processability. It is a very clean specialty carbon black to offer excellent product life. Along with excellent conductivity the other key performance attributes are low sulphur content, low ash content, ease of dispersion and low ionic impurities. It is suitable for use in medium and high voltage power cable, rubber applications and Electrostatic Discharge (ESD) Protection Products like IC Carrier Tape, IC Trays, IC Boxes, IC Pouches, Safety packaging for hazardous goods and Safety applications in explosive areas.

Exolit® OP 560 is a flame retardant that can be used for flexible polyurethane foams. It is a medium-viscosity liquid and it is based on a non-halogenated phosphorus polyol. The product is a reactive flame retardant which can be chemically reacted into the polymeric matrix. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry.

Dynasylan® VTMO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable inorganic trimethoxysilyl group. The dual nature of its reactivity allows Dynasylan® VTMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as a crosslinking agent, adhesion promoter and/or surface modifier. Dynasylan® VTMO is a colorless, low-viscosity liquid with a typical aromatic odor.

Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

BARIUM STEARATE AV has high bulk density, free flowing granules.

SharkDISPersion SX™ is a binder and resin used in plastics and elastomers for artificial grass and carpet applications. It provides good anti-static properties and UV resistance.