Products

Bluesil™ EMUL E1P is an oil in water emulsion containing 35% of a silicone oil. It can be used in many industries.

BONDERITE® L-GP 154, a specially processed colloidal graphite dry film lubricant, air dries rapidly at room temperature and adheres tenaciously to most substrates with minimum surface preparation. The thinness of the coating, coupled with high lubricity, provides clean, long wearing lubrication without redesign of component dimensions. Coatings are easily applied during manufacture or assembly by standard spray, brush, or dip techniques. BONDERITE L-GP 154 ACHESON is also an easy-to-apply resistance coating designed to provide conductivity, and excellent release properties to many nonconductive substrates, including most plastics. BONDERITE L-GP 154 ACHESON has been specified throughout the electronics industry in a multitude of roles. It can easily be blended with BONDERITE L-GP M 210 ACHESON (molybdenum disulfide insulating coating) to attain cost-effective sheet resistance variations.

BONDERITE® S-AD 197 is a concentrated dispersion of extremely high purity colloidal graphite in a water-insoluble polyalkalene glycol. It provides superior fluid lubrication in extreme temperature, high stress environments that carbonize petroleum oils. If temperatures rise to the point that the polyalkalene glycol volatilizes, an adherent film of graphite remains on the wear surface to maintain a low coefficient of friction and prevent metal-to-metal contact. BONDERITE® S-AD 197 is specially formulated and unequaled in its ability to resist settling out.

BONDERITE® S-FN EB-012 ACHESON is one in a series of conductive coatings designed to provide controlled electrical properties. BONDERITE® S-FN EB-012 ACHESON is an application versatile, single component, water based dispersion of graphite in a thermoplastic binder that offers an extremely flexible coating with low resistance at a low cure temperature. The coating will provide a conductive, chemical-resistant coating that will withstand the environment inside of a lithium-ion polymer battery. With proper dilution, BONDERITE® S-FN EB-012 ACHESON can be applied by spray, brush, roll, or print methods. Once properly cured, the coating provides a tenacious, chemical and solvent resistant coating for most metal substrates.

G-2000-2 is a member of a family of technologically advanced greases which have been developed by complexing modified overbased calcium sulfonates. This technology, developed and patented by Chemtura, is characterized by exceptional mechanical stability, high dropping point, high load carrying performance, reduced wear, and excellent resistance to water and corrosion. This technology equals and in many ways outperforms other premium, high temperature greases such as Lithium Complex, Aluminum Complex and Polyurea.

ExxonMobil™ Data Center Immersion Fluid 3235 Super is based on low viscosity polyalphaolefins fluids featuring excellent low temperature properties, low volatility, and improved thermal stability. ExxonMobil™ Data Center Immersion Fluid 3235 Super is ideally suited for immersion applications in data centers.

Toyal TCP-2 is used in chemical and industrial manufacturing, fillers, levellers and joints, and resin manufacturing markets. It is applied in fillers and thermal management.

Bluesil™ FLD 47 V1 000 is straight chained polydimethylsiloxanic fluids.

Hatcol® 3812 is aN advanced high-stability polyol esters.Hatcol® 3812 was developed to provide clean lubrication in high temperature environments, especially where lubricant deposits or coking residues are a problem. It contains antioxidants, anti-wear, and anticorrosion additives selected and balanced for optimum performance in a polyol ester lubricant.

BONDERITE® L-FG 1105 is a non-graphited, water-based die lubricant formulated to provide effective lubrication and release when hot forging on presses, upsetters and hammers. It is capable of wetting dies at temperatures as high as 371°C (700°F), and provides good metal flow.

Bluesil™ SLT 10T is a one-component, odorless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. Bluesil™ SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures.

BONDERITE® L-FG GP 151 is a lubricant in liquid form, designed for various lubrication applications.

Bluesil™ FLD 47 V10 000 (viscosities 10000) is dimethylpolysiloxane polymers with linear chains.

BONDERITE® S-FN TM-001A is one of a series of Henkel resin-bonded coatings designed to provide dry film lubrication and release in a variety of industrial and consumer applications. A flexible, water- based coating specially designed for flexible substrates, BONDERITE® S-FN TM-001A is a resin-bonded PTFE lubricant that prevents binding, seizing, sticking, and tearing of rubber and plastic parts during production and assembly. BONDERITE® S-FN TM-001A provides a clean dry film that protects substrates from oil, alcohol, gasoline, some inorganic acids, abrasive substances, dirt, and contaminants for longer wear life and reduced maintenance. BONDERITE® S-FN TM-001A is an ideal low-friction coating for substrates where operational flexibility is a major consideration. BONDERITE S-FN TM-001A (known as EMRALON TM-001A) can easily be tinted with a variety of color pigments for easy identification of parts.

BONDERITE® S-FN GP 1904 is a dispersion of PTFE and graphite in a thermosetting binder designed to be applied by spray, brush, or dip. BONDERITE® S-FN GP 1904 produces a low friction coating with excellent resistance to corrosion and solvents. The wide range of cure temperatures 149 to 260°C allows BONDERITE® S-FN GP 1904 to be used on wood, rubber and many plastics and on engineering metals. BONDERITE® S-FN GP 1904 is a one-package product and is not affected by low temperature storage conditions.