Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Code
- MITM11932
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Key Features and Benefits
- Product Features:
- Water based coating that cures at a low temperature
- The highly flexible coating provides excellent adhesion to copper and aluminum substrates, providing chemical and solvent resistance
- The wet coating can be applied by spray, brush, roller, or flexo and gravure print techniques
- Product Benefits:
- The low VOC level found in this product, allow for easier compliance to local environmental legislation. The low cure temperature allows for energy savings, thus reducing overall process costs
- Proven performance for polymer lithium-ion battery applications
- The application versatile coating allows for flexibility of choice with regard to part processing
- Product Features:
Applications & Uses
- Application Area
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Markets
- Applications
- Application and Usage Information
- Product Application
- Conductive protective coating for lithium-ion and lithium-ion polymer batteries
- Current collector coating for EDLC applications
- Conductive coating on screw threads
- Tough, tenacious, chemical and solvent-resistant coating on metals
- Usage Information
- Surface Preparation
- Substrates must be dry and free of contaminants (dirt, grease, powder, and other residues) before application of BONDERITE® S-FN EB-012 ACHESON.
- The etching process to prepare aluminum grids for coating is as follows:
- Soak grid three minutes in 5% NaOH
- Rinse 30 seconds under tap water
- Soak 30 seconds in 1% HCI
- Rinse 30 seconds under tap water
- Rinse with Acetone to remove water
- Allow to dry before coating
- Mixing/Blending/Dilution
- BONDERITE® S-FN EB-012 ACHESON is supplied ready for use, but an addition of up to 8 ounces of water can be added per gallon, if needed. Thoroughly mix BONDERITE S-FN EB-012 ACHESON on a paint shaker or with a prop blade mixer before use. Do not vortex or agitate violently, as air entrapment or foaming may cause separation of solids.
- Application
- BONDERITE® S-FN EB-012 ACHESON is normally applied by printing or spray techniques. For spray application, use either a conventional system, or for greater transfer efficiency, high volume, low pressure (HVLP) type equipment. Optimum coating thickness is 0.001 inches (25.4 microns). However, a thinner coating may be acceptable, depending on individual performance requirements.
- Curing
- BONDERITE® S-FN EB-012 ACHESON may be cured by exposure to any of the time/temperature conditions indicated.
- Air dry at room temperature for 24 hours
- Forced dry 3-10 minutes at (70°-90°C) 158°-203°F
- BONDERITE® S-FN EB-012 ACHESON may be cured by exposure to any of the time/temperature conditions indicated.
- Surface Preparation
- Product Application
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000218
- Principal
Storage & Handling
- Storage and Shelf Life Information
- Shelf life for this product is 12 months from date of qualification under original seal. Prolonged storage of BONDERITE® S-FN EB-012 ACHESON at temperatures higher than 50°C is not recommended. Do not allow to freeze. Empty containers may retain hazardous properties. Follow all MSDS/label warnings even after container is emptied.
Other
- Color (SDS)
- Black
- IATA/ICAO Proper Shipping Name
- Not Applicable
- IATA/ICAO UN Number
- Not Applicable
- IMO/IMDG Proper Shipping Name
- Not Applicable
- IMO/IMDG UN Number
- Not Applicable
- Item Number
- Odor (SDS)
- Characteristic
- Protect from Freezing
- Yes
- USA/DOT Proper Shipping Name
- Not Applicable
- USA/DOT UN Number
- Not Applicable
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Coverage 7.4 m²/kg m²/kg at 25 µm Coverage max. 30.0 m²/L m²/L at 25μm, dry film thickness Density 1.09-1.14 kg/L kg/L Storage Temperature 41.0-86.0 °F °F Viscosity 50.0-200.0 mPa.s mPa.s of wet product - Material Composition
Value Units Test Method / Conditions Solid Content 29.0-31.0 %(W/W) %(W/W) wet product Volatile Organic Compounds (VOC) 10.0 g/L g/L of wet product - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Specific Gravity (SDS) 1.11-1.12 - Vapor Pressure (SDS) 17.0 mm Hg mm Hg Viscosity (SDS) 50.0-200.0 cPs cPs pH (SDS) 8.0-9.0 -